We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue vinyl insulated fork terminal with tin-plated copper barrel for 14 AWG wire

Thomas & Betts

Thomas & Betts STA-KON 14RB-14F Fork Terminal 14 AWG 600 V Vinyl

SKU CH-93CB-HCHA8

A vinyl-insulated fork terminal for 14 AWG wire, rated to 600 V and a 1/4 in stud, with a tin-plated copper barrel and CSA/UL listing

  • TypeElectrical Connectors
  • Fork terminal rated 600 V for reliable power connections
  • 14 AWG wire capacity suits standard automotive circuits
  • Brazed seam construction resists vibration and pull-out
  • Vinyl insulation rated 221 °F withstands engine-bay heat
  • CSA certified and UL listed for code compliance

STA-KON 14 AWG Fork Terminal

The STA-KON 14RB-14F is a vinyl-insulated fork terminal designed for 14 AWG wire and a 1/4 in stud. It suits automotive, industrial and general electrical wiring where a secure crimp connection is required. The terminal is UL listed and CSA certified for 600 V service.

Crimp Installation and Common Issues

Installation uses a standard crimp tool on the brazed-seam barrel with insulation grip. Partial vinyl coverage leaves the barrel end exposed so the crimp can be inspected visually. A loose crimp or mismatched wire gauge are the usual causes of failure.

Capacity Limits and Headroom

Rated for 14 AWG maximum wire size and 600 V, the connector handles typical low-voltage power and signal circuits. The 221 °F temperature rating provides margin for engine-bay or panel heat. Circuits requiring larger conductors or higher voltage need a different terminal.

Highlights

  • Fork terminal rated 600 V for reliable power connections
  • 14 AWG wire capacity suits standard automotive circuits
  • Brazed seam construction resists vibration and pull-out
  • Vinyl insulation rated 221 °F withstands engine-bay heat
  • CSA certified and UL listed for code compliance

Specifications

TypeElectrical Connectors
BrandSTA-KON

Questions about this item

How can I verify the crimp on the 14 AWG fork terminal is secure after installation?

After crimping, inspect the barrel to confirm the wire is fully seated and the insulation grip holds the jacket firmly. A proper crimp shows no loose strands and the tin-plated copper barrel grips the conductor evenly.

What components are included with the STA-KON 14RB-14F terminal and what must be purchased separately?

The package contains the vinyl-insulated fork terminal with a brazed seam and 0.51 in barrel length. You must supply the 14 AWG wire and a compatible crimping tool rated for insulated terminals.

Which stud size version should I select for a 1/4 inch mounting bolt?

Choose the 14RB-14F model, which is built for a 1/4 in stud size and accepts 14 AWG wire at 600 V maximum. Other stud sizes are different part numbers not covered by this listing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.