We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper compression lug with single hole and tin finish

Thomas & Betts

Thomas & Betts 54905BEPH 6 AWG Copper Compression Lug

SKU CH-JMYJ-MQ79D MPN 54905BEPH

One-hole copper compression lug for 6 AWG wire, 0.296 in barrel OD, 0.8 in tongue, tin-plated, CSA/UL E9809, 35 kV AC rated

  • TypeStandard Lug
  • Copper construction ensures high conductivity
  • Tin-plated finish resists corrosion for reliable connections
  • 35 kV AC rating suits high-voltage applications
  • UL E9809 and CSA certification confirm safety compliance
  • 6 AWG barrel with .296 in OD fits stranded copper wire

Copper compression lug for 6 AWG wire

This one-hole lug connects 6 AWG stranded copper conductors to a 1/4 inch stud. The barrel is colour-coded blue with die code 24 and carries a tin-plated finish. It is rated for up to 35 kV AC and meets CSA and UL E9809 standards.

Suited for panel and equipment wiring

Installers terminating a single 6 AWG copper cable in control panels, switchgear or motor leads will find this lug a direct fit. It is not intended for multi-hole mounting patterns, aluminium conductors or larger wire gauges that require a different barrel size.

Straight barrel with 0.8 inch tongue width

The tongue measures 0.8 inches wide and sits on a straight barrel with an outside diameter of 0.296 inches. An inspection hole allows visual confirmation of full conductor insertion before crimping.

Highlights

  • Copper construction ensures high conductivity
  • Tin-plated finish resists corrosion for reliable connections
  • 35 kV AC rating suits high-voltage applications
  • UL E9809 and CSA certification confirm safety compliance
  • 6 AWG barrel with .296 in OD fits stranded copper wire

Specifications

BrandThomas & Betts
Model54905BEPH
TypeStandard Lug

Questions about this item

What stud size does the 1/4 in hole on the 54905BEPH lug accept?

The lug has a single hole sized for a 1/4 in stud, with the tongue width measuring 0.8 in.

What barrel outside diameter must the crimp tool accommodate for this connector?

The barrel outside diameter is 0.296 in, and the die code is 24.

Which crimp die should be used when installing the 54905BEPH lug?

Use a die coded 24 that matches the 0.296 in barrel outside diameter; the inspection hole lets you verify full conductor insertion.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.