We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tin-plated copper two-hole compression lug, straight barrel, blue color code, inspection hole visible

Thomas & Betts

Thomas & Betts 54852 Two Hole Lug 6 AWG

SKU CH-C0FX-4MATS

Two-hole compression lug for 6 AWG copper wire with 0.625 in hole spacing and 35 kV rating

  • TypeStandard Long Barrel with PeepHole Max 35KV
  • Tin-plated copper resists corrosion for lasting conductivity
  • Two-hole design with 0.625 in spacing ensures secure mounting
  • Inspection hole allows visual confirmation of full wire insertion
  • Rated to 35 kV for high-voltage applications
  • CSA certified and UL E9809 listed for code compliance

Two-Hole Copper Compression Lug

This Thomas & Betts 54852 connector is a straight-barrel compression lug built from tin-plated copper for 6 AWG stranded copper wire. It carries a blue colour code and die code 24 with a long barrel and an inspection hole. The lug is CSA certified and listed under UL E9809 for use up to 35 kV.

Installers needing dual-hole termination

Electrical contractors and panel builders who require a 1/4 in stud spacing with 0.625 in centre-to-centre hole centres will find this lug fits directly. It is not suited for aluminium conductors, larger wire gauges, or single-hole mounting patterns.

6 AWG copper capacity and headroom

The 0.3 in barrel outside diameter and 0.11 in tongue width comfortably accept 6 AWG stranded copper and provide a secure crimp connection at the rated voltage. Headroom ends at the maximum 6 AWG conductor size and the two-hole 1/4 in stud configuration.

Highlights

  • Tin-plated copper resists corrosion for lasting conductivity
  • Two-hole design with 0.625 in spacing ensures secure mounting
  • Inspection hole allows visual confirmation of full wire insertion
  • Rated to 35 kV for high-voltage applications
  • CSA certified and UL E9809 listed for code compliance

Specifications

BrandThomas & Betts
TypeStandard Long Barrel with PeepHole Max 35KV

Questions about this item

What crimp tool and die code do I need for the 54852 lug?

Use a compression crimp tool with die code 24 that matches the long barrel and blue colour code for 6 AWG copper.

Will the .625 in hole spacing match the 1/4 in studs on my existing bus bar?

Yes, the two holes are spaced .625 in centre-to-centre and each accepts a 1/4 in stud.

How can I confirm the wire is fully seated after crimping?

Check the inspection hole on the barrel; the copper conductor should be visible through it.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.