We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green copper C-tap connector with crimp ends

Thomas & Betts

Thomas & Betts 54725 C Tap Green 24

SKU CH-D59R-AMCGA

Green C-tap connector joins copper conductors from 12 to 3 AWG at up to 600 V with a crimp termination

  • TypeElectrical Connectors
  • Green colour code for quick visual identification
  • Copper construction rated to 600 V for reliable conductivity
  • UL E9809 listed for code-compliant installations
  • Crimp termination covers 5–3 AWG main and 6–12 AWG branch
  • Die code 37 ensures correct tool setting for secure joints

ABB 54725 C Tap Green 24

This ABB C Tap connector joins copper conductors in electrical installations up to 600 V. It accepts main wires from 5 AWG to 3 AWG and branch or tap wires from 12 AWG to 6 AWG. The plain copper finish and UL E9809 listing make it suitable for industrial and commercial wiring work.

Green colour code and die code 37

The green colour code identifies the connector size for quick selection on site. Die code 37 matches the corresponding crimp tool die for a consistent compression joint. Crimp termination provides a secure mechanical and electrical bond that resists vibration and thermal cycling under continuous load.

Replaces loose splices or mismatched taps

Upgrading from improvised splices or incorrectly sized connectors eliminates hot spots and reduces rework. The jump is worth it when a permanent, code-compliant connection is required for copper conductors within the stated wire range.

Highlights

  • Green colour code for quick visual identification
  • Copper construction rated to 600 V for reliable conductivity
  • UL E9809 listed for code-compliant installations
  • Crimp termination covers 5–3 AWG main and 6–12 AWG branch
  • Die code 37 ensures correct tool setting for secure joints

Specifications

BrandABB
TypeElectrical Connectors

Questions about this item

Does the 54725 C Tap generate any heat or noise during continuous use?

The 54725 C Tap is a passive copper connector with no moving parts, so it produces no noise and negligible heat when installed correctly within its 600 V rating.

What crimping tool and die are required to install the 54725 C Tap?

A crimping tool that accepts die code 37 is needed to terminate the 54725 C Tap onto copper conductors ranging from 12 AWG to 3 AWG.

Can the 54725 C Tap connect to existing aluminium wiring in an older panel?

No, the 54725 C Tap is rated only for copper conductors; aluminium wiring requires a different connector material and termination method.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.