We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red vinyl insulated fork terminal with tin plated copper barrel and number ten stud hole

Thomas & Betts

Thomas & Betts 18RA-10FL 22-16 AWG Vinyl Locking Fork Terminal #10 Stud PK100

SKU CH-AV6R-ZTWP7

Vinyl-insulated locking fork terminal for 22-16 AWG wire, #10 stud, 600 V, 221 °F, UL listed and CSA certified, pack of 100

  • TypeElectrical Connectors
  • Secure crimp grip on 22-16 AWG wire
  • Tin-plated copper contact resists corrosion
  • Red vinyl insulation rated to 221°F
  • UL listed and CSA certified for 600 V
  • Locking fork design fits #10 stud securely

Fork Terminals for 22-16 AWG Wire

These vinyl-insulated locking fork terminals accept 22 to 16 AWG conductors and terminate on a #10 stud. The pack contains 100 pieces suited for automotive and industrial wiring tasks where a secure crimp connection is required.

Crimp-On #10 Stud with Brazed Seam

The single specification that decides fit is the #10 stud size combined with a 22-16 AWG wire range and a brazed-seam barrel that resists separation during crimping. The tongue length is 0.42 in and the barrel length is 0.56 in, so verify stud and wire gauge before ordering.

Vinyl Insulation and Tin-Plated Copper

Red vinyl insulation provides partial coverage and a maximum operating temperature of 221 Degrees F with a 600 V rating. The tin-plated copper contact and insulation-grip barrel deliver corrosion resistance and mechanical strain relief, while CSA and UL listings confirm compliance for regulated installations.

Highlights

  • Secure crimp grip on 22-16 AWG wire
  • Tin-plated copper contact resists corrosion
  • Red vinyl insulation rated to 221°F
  • UL listed and CSA certified for 600 V
  • Locking fork design fits #10 stud securely

Specifications

TypeElectrical Connectors
BrandThomas & Betts

Questions about this item

What does the 600 V rating actually limit in a typical low-voltage circuit?

It sets the maximum insulation voltage the terminal can withstand; the circuit voltage must stay below 600 V.

How does the #10 stud size and vinyl insulation affect which crimp tool and wire range I can use?

The terminal accepts 22–16 AWG wire and fits a #10 stud; use a crimp tool rated for that AWG range and vinyl-insulated terminals.

What clearance do the 0.42 in tongue and 0.56 in barrel need inside a terminal block or panel?

Allow at least 0.42 in for the tongue length and 0.56 in for the barrel length when planning mounting space.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.