We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular GPS receiver with magnetic base and two-metre USB cable

Thinkstar

Thinkstar USB GPS Receiver Antenna Gmouse 56-Channel UBX-G7020 2M Cable

SKU CH-A2DT-SYWE1

A 56-channel USB GPS receiver with U-BLOX 7 chipset, 2 m cable and magnetic base for laptop, car, marine or Raspberry Pi navigation

  • TypeGPS Receiver
  • 56-channel U-BLOX UBX-G7020 chipset tracks more satellites simultaneously
  • High -162 dBm sensitivity acquires signals in challenging environments
  • 2 metre USB cable allows flexible antenna placement for better reception
  • IPX4 water resistance protects against splashes in marine or automotive use
  • Compatible with Windows 98 through 11, Linux, Raspberry Pi and OpenCPN software

Thinkstar USB GPS Receiver

The Thinkstar USB GPS Receiver is a 56-channel GNSS antenna designed for laptop, PC, car, marine and Raspberry Pi navigation. It uses a U-BLOX UBX-G7020 chipset with -162 dBm tracking sensitivity and supports NMEA 0183, WAAS, EGNOS, MSAS, QZSS and GAGAN protocols. The device connects via a standard USB port with a 2 metre cable and features a magnetic base with IPX4 water resistance. It is powered directly from the USB port and works with U-CENTER evaluation software.

Who this suits and who it does not

This receiver suits users needing a plug-and-play GPS antenna for Windows 98 through Windows 11, Raspberry Pi with gpsd, or marine charting software such as OpenCPN. It is not for buyers who require an internal PCIe or M.2 form factor, devices with built-in data logging storage, or multi-constellation receivers supporting L2 or L5 band signals. The magnetic mount also limits permanent through-hole installations.

U-BLOX UBX-G7020 chipset

The single specification that decides compatibility is the U-BLOX UBX-G7020 chipset providing 56-channel all-in-view tracking at -162 dBm sensitivity. This determines the satellite constellations received, the NMEA 0183 protocol output, and the USB serial interface used by U-CENTER V8.2X software. The 2 metre cable length and IPX4 rating define the physical installation envelope for automotive or marine use.

Highlights

  • 56-channel U-BLOX UBX-G7020 chipset tracks more satellites simultaneously
  • High -162 dBm sensitivity acquires signals in challenging environments
  • 2 metre USB cable allows flexible antenna placement for better reception
  • IPX4 water resistance protects against splashes in marine or automotive use
  • Compatible with Windows 98 through 11, Linux, Raspberry Pi and OpenCPN software

Specifications

TypeGPS Receiver

Questions about this item

Does my computer need a free USB-A port to connect this GPS receiver?

Yes, the device plugs directly into a USB-A port and draws power from it, so a spare port is required.

Will the magnetic base hold the antenna firmly on a steel vehicle roof at highway speed?

The magnetic base is designed for automotive mounting and stays attached on steel surfaces during normal driving.

How can I confirm the receiver is outputting valid NMEA sentences after I install U-CENTER V8.2X?

Open U-CENTER, select the correct COM port, and watch the NMEA 0183 stream populate with latitude, longitude and satellite count.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.