We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Thinkstar

Thinkstar Active USB 3.0 Extension Cable 100 Feet 3 Chipsets AC Power Supply

SKU CH-QFN4-DBZV3

Active USB 3.0 extension cable reaches 100 feet with three signal-boosting chipsets and an included AC power supply for reliable 5 Gbit/s data transfer

  • Connector TypeUSB B to USB A
  • Extends USB devices up to 100 feet with three built-in chipsets
  • Delivers 5 Gbit/s SuperSpeed data rates for fast transfers
  • Backward compatible with USB 2.0 at 480 Mbit/s for older peripherals
  • Gold-plated connectors and foil-braid shielding ensure error-free transmission
  • Moulded strain relief and grip treads provide durable, easy connections

Active USB 3.0 Extension Cable 100 Feet

This active USB 3.0 extension cable spans 100 feet using three integrated chipsets to boost the signal. It connects a computer or Windows tablet to USB 3.0 and USB 2.0 peripherals such as hard drives, hubs, mice, keyboards, flash drives, and printers. An AC power supply is included to maintain reliable operation over the full length.

Compatibility and Power Requirements

The cable uses a USB B to USB A connector arrangement, so verify that your host and peripheral ports match this configuration. Because the cable draws power for its internal repeaters, ensure the included AC adapter can reach a mains outlet near the cable midpoint. Devices that require bus power above standard USB limits may need their own supply.

Thermals Noise and Power Draw

The active repeater electronics operate without fans, so the cable runs silently in normal use. Power for the three chipsets comes from the supplied AC adapter rather than the host port, keeping USB bus load low. Gold-plated connectors and foil-and-braid shielding help maintain signal integrity without generating noticeable heat.

Highlights

  • Extends USB devices up to 100 feet with three built-in chipsets
  • Delivers 5 Gbit/s SuperSpeed data rates for fast transfers
  • Backward compatible with USB 2.0 at 480 Mbit/s for older peripherals
  • Gold-plated connectors and foil-braid shielding ensure error-free transmission
  • Moulded strain relief and grip treads provide durable, easy connections

Specifications

Connector TypeUSB B to USB A

Questions about this item

Does the 100-foot cable ship with the AC power supply or must I buy it separately?

The AC power supply is included in the box so the active extension works immediately; no extra purchase is required.

Should I choose this 30-metre active cable or a shorter passive one for my USB 3.0 hard drive?

Pick the 30-metre active version when the run exceeds the passive limit; the three built-in chipsets boost the signal so SuperSpeed reaches the full distance.

Will my USB 3.0 hard drive actually hit 5 Gbit/s through the 100-foot repeater?

The cable supports the 5 Gbit/s SuperSpeed spec, but real-world throughput depends on the drive, controller and file mix; expect near-spec speeds with a fast SSD and light protocol overhead.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.