We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal cold spark machine with LCD panel and DMX ports

Thinkstar

Thinkstar 600W Cold Spark Machine DMX Stage Effect

SKU CH-F6YF-VCVBD

A 600 W cold-spark effect unit with DMX and 16-key remote control, adjustable 1–5 m fountain height, over-heat protection and emergency stop

  • Non-hazardous spark effect replaces traditional pyrotechnics
  • 600 W power with 3-minute pre-heat for quick setup
  • Adjustable fountain height from 1 to 5 metres
  • DMX and 16-key remote control with dual ports
  • Over-heat protection and emergency stop for safe operation

Cold Spark Machine for Stage Events

The Thinkstar 600W cold spark machine creates non-hazardous pyrotechnic effects for indoor and outdoor productions. It uses a Ti composite powder system instead of gunpowder, removing fire risk and environmental pollution. The unit is built for DJs, event planners and venues that need safe, programmable spark displays.

Thermal Behaviour and Power Draw

A three-minute pre-heat readies the heater before the first jet, and over-heat protection shuts the system down if temperatures exceed safe limits. The manufacturer highlights low-noise operation during shows. Rated power is 600W at AC 110V 60Hz, with a 5A or 10A fuse protecting the circuit.

DMX and Remote Control Integration

Two DMX channels and a 16-key wireless remote give direct control over jet height from 1 to 5 metres and effect duration. An LCD display board shows status and settings, while dual DMX and dual AC power ports allow daisy-chaining multiple units. An emergency stop and powder cleaning function complete the control suite.

Highlights

  • Non-hazardous spark effect replaces traditional pyrotechnics
  • 600 W power with 3-minute pre-heat for quick setup
  • Adjustable fountain height from 1 to 5 metres
  • DMX and 16-key remote control with dual ports
  • Over-heat protection and emergency stop for safe operation

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the Thinkstar 600W Cold Spark Machine and what is the common mistake?

Connect AC110V power to either AC port, link DMX cables to the double DMX ports, allow the 3-minute pre-heating time before triggering effects, and ensure the 5A or 10A fuse is correctly seated — skipping the warm-up is the step most users miss.

What maintenance will this spark machine need over time?

Use the built-in Ti composite powder cleaning function after each show to clear residue, check the 5A or 10A fuse periodically, and replace the consumable spark powder when the 1-5 m jet height noticeably drops.

What limit appears first during continuous operation?

The over-heat protection engages first under sustained use, cutting output until the unit cools, so plan duty cycles around the 600 W rating and 3-minute pre-heat to avoid interruptions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.