We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal network switch with forty-eight RJ45 ports and four SFP slots

Thinkstar

Thinkstar 48-Port Gigabit L2+ Managed PoE+ Switch 384W 4 SFP

SKU CH-2P21-HHD6E

A 52-port Gigabit switch with 48 PoE+ ports delivering up to 30W each and a 384W total budget, plus four SFP uplinks, L2+ static routing, and Omada SDN integration

  • 48 PoE+ ports deliver up to 30W each with 384W total power budget
  • Four Gigabit SFP slots provide high-speed fibre uplinks for backbone links
  • Omada SDN integration enables centralised cloud management from a single interface
  • L2+ static routing improves internal traffic efficiency across the network
  • Advanced security suite includes 802.1Q VLAN, ACL, DHCP Snooping and 802.1X authentication

48-Port PoE+ Switch for IP Networks

The Thinkstar 48-port Gigabit L2+ managed PoE+ switch delivers 48 RJ45 ports with 802.3at/af compliance, each supplying up to 30 W, and a total PoE budget of 384 W. Four Gigabit SFP slots provide fibre uplinks. The switch integrates with the Omada SDN platform for centralised cloud management via hardware controller, software controller or mobile app. L2+ static routing improves internal traffic efficiency.

Verify SFP Modules and PoE Budget Before Install

Confirm that your SFP transceivers match the Gigabit SFP slots and that the combined power draw of connected powered devices stays within the 384 W PoE budget. Ensure the Omada controller version you run supports SDN firmware on this switch, or plan a firmware upgrade. Check that your rack or shelf provides adequate airflow for a 52-port device operating at full PoE load.

Fan-Assisted Cooling Handles 384 W PoE Load

Internal fans maintain safe temperatures when all 48 ports draw PoE+ power up to the 384 W limit. Acoustic output rises with fan speed under heavy PoE demand but remains within typical rack-mount switch norms. Power consumption scales with attached device load and SFP link activity; the supply is sized for the maximum 384 W PoE budget plus switching overhead.

Highlights

  • 48 PoE+ ports deliver up to 30W each with 384W total power budget
  • Four Gigabit SFP slots provide high-speed fibre uplinks for backbone links
  • Omada SDN integration enables centralised cloud management from a single interface
  • L2+ static routing improves internal traffic efficiency across the network
  • Advanced security suite includes 802.1Q VLAN, ACL, DHCP Snooping and 802.1X authentication

Specifications

No published specifications for this item yet.

Questions about this item

Does the 48-port PoE+ switch include SFP transceivers or only the empty slots?

The unit provides 48 PoE+ RJ45 ports and 4 empty Gigabit SFP slots; transceivers must be purchased separately.

Should I pick the 384 W model or a lower-budget version for 48 cameras needing 24 W each?

With a 384 W total budget and 30 W maximum per port, the switch can power all 48 ports at 24 W simultaneously.

What does the 384 W PoE budget mean when every port is active in a rack?

The 384 W budget is shared across all 48 PoE+ ports; if every device draws the full 30 W the switch will allocate power until the budget is exhausted.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.