We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thinkstar HDMI extender splitter kit with one transmitter and four receivers in metal housings

Thinkstar

Thinkstar 1x4 HDMI Extender Splitter over CAT5e/6/7 up to 40m 1080p 60Hz IR Remote

SKU CH-BQCN-1EFW4

Distributes one HDMI source to four displays over CAT5e/6/7 up to 40 metres at 1080p 60Hz with IR remote control

  • Distribute one HDMI source to four displays simultaneously
  • Transmit 1080p 60 Hz video up to 40 metres over CAT5e/6/7
  • Support 7.1-channel surround sound and stereo digital audio
  • Control the source remotely via IR cables over the same CAT cable
  • Install instantly with driver-free setup and surface-mountable metal housing

1×4 HDMI Extender Splitter over CATx

The Thinkstar 1×4 HDMI extender splitter distributes a single HDMI source to four displays over CAT5e, CAT6 or CAT7 cable. It transmits uncompressed video up to 1080p at 60 Hz with 7.1-channel surround sound. The all-in package includes one transmitter and four receivers for immediate deployment in gyms, sports bars, houses of worship, auditoriums, broadcasting stations, restaurants or event venues.

Replaces direct HDMI runs and basic splitters

When source equipment sits farther than a standard HDMI cable allows, this kit extends the signal up to 40 metres (130 feet) at 1080p 60 Hz without compression. The jump is worth it for installations that need identical, synchronous output on four screens and IR control of the source from a remote location. It does not serve buyers who need resolutions beyond 1080p or transmission distances greater than 40 metres.

Limited to HDMI 1.3 and HDCP 1.4

The extender complies with HDMI 1.3 and HDCP 1.4, so protected content at 1080p passes through while newer copy-protection or higher-bandwidth formats are not supported. EDID management is handled by DIP switches on the transmitter to lock a compatible format across all four outputs. Signal quality depends entirely on using good-quality pure-copper CATx cable; inferior or CCA cable will cause dropouts. No drivers or software are required.

Highlights

  • Distribute one HDMI source to four displays simultaneously
  • Transmit 1080p 60 Hz video up to 40 metres over CAT5e/6/7
  • Support 7.1-channel surround sound and stereo digital audio
  • Control the source remotely via IR cables over the same CAT cable
  • Install instantly with driver-free setup and surface-mountable metal housing

Specifications

No published specifications for this item yet.

Questions about this item

What cable type and length are required to reach the 40 metre distance at 1080p 60 Hz?

Use CAT5e, CAT6 or CAT7 cable up to 40 metres (130 ft) for 1080p 60 Hz transmission.

How do I connect the IR remote control so the source device responds from the display side?

Plug the supplied IR emitter cable into the transmitter near the source and the IR receiver cable into the receiver at the display; commands travel over the same CAT cable.

When should I adjust the EDID DIP switches on the transmitter?

Change the DIP switch settings if a connected display does not show the correct resolution or audio format; the switches force the source to output a compatible EDID.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.