We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal transmitter box and four matching receiver units with HDMI and Ethernet ports visible

Thinkstar

Thinkstar 1x4 HDMI Extender Splitter Balun HDbitT4Pv2 395ft 4port

SKU CH-JRJZ-ZG6MB

Extends one HDMI source to four displays over CAT5e/6 up to 395 ft with IR control

  • Distribute one HDMI source to four displays simultaneously
  • Extend 1080p signals up to 395 feet over CAT5e/6
  • Connect directly or through a Gigabit network switch
  • Control the source remotely with included IR extension cables
  • Scale to 30 receivers per transmitter for building-wide coverage

Thinkstar 1x4 HDMI Extender Kit

This kit contains one transmitter and four receivers that distribute a single HDMI source to four displays over CAT5e, CAT6 or CAT7 cable. The signal reaches up to 395 feet without compression. Version 2.0 hardware is not compatible with earlier HDbitT receivers. No driver installation is required and the metal housings can be surface-mounted.

Best for multi-room 1080p distribution

Installers needing to send 1080p video to several rooms over structured cabling will find the direct or switch-based topology flexible. The system supports up to thirty receivers per transmitter for larger deployments. Buyers who require 4K resolution, HDCP 2.2 compliance or game-console compatibility should look at other solutions.

IR cables and cascade switching included

Bundled IR emitter and receiver cables let users control the source device from any remote display location. The transmitter can connect directly to receivers or through unmanaged gigabit switches, and it supports cascading multiple switches throughout a building. Additional receivers are sold separately to expand beyond the four included units.

Highlights

  • Distribute one HDMI source to four displays simultaneously
  • Extend 1080p signals up to 395 feet over CAT5e/6
  • Connect directly or through a Gigabit network switch
  • Control the source remotely with included IR extension cables
  • Scale to 30 receivers per transmitter for building-wide coverage

Specifications

No published specifications for this item yet.

Questions about this item

Does my network switch need to be Gigabit for the 395ft IP distribution to work?

Yes, an unmanaged or smart Gigabit switch is required for network distribution; direct CAT5e/6/7 links also reach 395ft without a switch.

Can I mix the v2.0 transmitter with older HDbitT receivers I already have?

No, the HDbitT4Pv2 kit is not backward compatible with the previous version or its receivers.

How do I confirm the 1080p video and IR control are functioning after setup?

Verify the displays show a 1080p signal at 50/60Hz and use the included IR cables to operate the source device from each receiver location.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.