Thermal Grizzly WireView Pro II GPU monitor 90° 12VHPWR White

Advanced GPU monitoring for 12V-2x6 connectors

The WireView Pro II measures current, voltage, temperature and power draw directly on 12V-2x6 and 12VHPWR graphics cards. It displays per-pin current values and real-time readings on an integrated 320x170 pixel TFT-IPS display. The device operates without software and includes audible and visual alerts plus 60-second data logging for early detection of critical load conditions. A semi-passive 30 mm fan provides active cooling.

Practical limits of the 12V-2x6 interface

The monitor tracks safety-relevant parameters continuously and applies defined threshold values that should not be exceeded during regular operation to reduce the risk of thermal damage. When a threshold is crossed, a visual warning appears on the display and an audible alarm triggers. Per-pin measurement enables immediate identification of potential contact issues between the cable and graphics card. The patented design is protected by European patent EP4250057.

What to check before ordering

This normal version routes the cable toward the GPU cooler with the sense pin on top and the latch at the bottom, also functioning as a 90-degree adapter. Verify that your graphics card uses a 12V-2x6 or 12VHPWR connector and that the cable routing direction suits your case layout. The unit is purpose-built for high-end cards with this specific connector type and will not work with other power interfaces. Ensure physical clearance for the display and fan assembly.