Thermal Grizzly
Thermal Grizzly TG-MP-A-120-20-20-4 Minus Pad Advance 120x20x2.0mm 4-pack thermal pads
Electrically non-conductive thermal pads measuring 120 x 20 x 2.0 mm, supplied in a 4-pack for SSDs, GPUs and other electronics
- FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the
- Electrically non-conductive design prevents shorts on sensitive electronics
- Advanced thermal conductivity rapidly transfers heat from SSDs and GPUs
- High compressibility ensures flawless contact across uneven surfaces
- 120 x 20 mm dimensions with 2.0 mm thickness suit various components
- Easy-to-use pads deliver reliable cooling for voltage regulators and memory modules
Thermal Grizzly Minus Pad Advance 2.0 mm
The Minus Pad Advance is a 2.0 mm thick thermal pad sold in a four-pack of 120 x 20 mm pieces. It is designed for builders who need electrically non-conductive gap filling on graphics cards, SSD controllers, voltage regulators or memory modules. The Advance tier improves thermal conductivity and compressibility over the Basic series while keeping installation straightforward.
Practical limits of thermal pads
Thermal pads only conduct heat across the gap they fill; they do not move heat away like a heatsink or liquid loop. Performance depends on mating surfaces being flat and clean, and on the pad being compressed to its intended thickness without excessive force. A pad that is too thick for the gap will not compress fully, while one that is too thin leaves air pockets that degrade heat transfer.
Check gap height and surface area before ordering
Measure the distance between the component and its cooler to confirm a 2.0 mm pad matches the required compression range. Verify that the 120 x 20 mm rectangles can cover the target chips or be cut cleanly to smaller shapes without waste. Ensure the surfaces are free of old compound or protective films so the non-conductive pad makes full contact.
Highlights
- Electrically non-conductive design prevents shorts on sensitive electronics
- Advanced thermal conductivity rapidly transfers heat from SSDs and GPUs
- High compressibility ensures flawless contact across uneven surfaces
- 120 x 20 mm dimensions with 2.0 mm thickness suit various components
- Easy-to-use pads deliver reliable cooling for voltage regulators and memory modules
Specifications
| Brand | Thermal Grizzly |
|---|---|
| Model | TG-MP-A-120-20-20-4 |
| Part Number | TG-MP-A-120-20-20-4 |
| Features | Thermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance, and Pro series. The Basic pads are easy to use, provide good thermal conductivity, slightly lower compressibility, and offer an excellent price-performance Ratio. |
Questions about this item
How do I decide between the 120x20x2.0mm pads and other thicknesses?
Choose the 2.0mm thickness when the gap between your component and cooler measures close to two millimetres; thinner pads suit smaller gaps, thicker pads suit larger ones.
What does the advance series label tell me about real-world cooling?
The advance series delivers improved thermal conductivity and higher compressibility than the basic series, so it fills uneven surfaces better and moves heat faster under load.
Does the non-conductive specification limit which interfaces I can use it on?
No, being electrically non-conductive means it is safe on any exposed circuitry — SSDs, GPU memory, voltage regulators — without risk of shorting pins or traces.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115589BTC
In stock
