Thecoolcube
Thecoolcube 2 in 1 Accessory Car Camera Hilux 2004-2018 Black
Waterproof rear-view camera with 170-degree view and CCD sensor fits Toyota Hilux 2004-2018 models
- 170-degree wide view covers blind spots
- CCD sensor delivers 520 TV lines resolution
- Waterproof build handles all weather conditions
- Night vision aids low-light reversing
- 6-metre cable reaches from tailgate to dash
Vehicle fit and purpose
This accessory camera replaces the number-plate light on Toyota Hilux models from 2004 to 2018, covering AN10, AN20, AN30, AN120 and AN130 variants. It supplies a 170-degree viewing angle to reduce blind spots while reversing and uses a CCD sensor with 752 by 582 resolution for clear rear vision.
Installation requirements
The unit mounts in a 54mm by 35mm recess; if that hole is absent the installer must cut it. A six-metre composite video and power cable runs from the tailgate to the dashboard and terminates in a universal RCA plug, which may need an extra adapter for factory radios. The camera is designed for aftermarket monitors and does not integrate well with original factory displays.
Sustained operation
Powered by a 12-volt DC supply, the weatherproof housing and night-vision capability maintain image quality during extended driving in rain or darkness. The CCD sensor delivers a stable 520 TV-line horizontal picture without overheating or signal degradation over long periods of continuous use.
Highlights
- 170-degree wide view covers blind spots
- CCD sensor delivers 520 TV lines resolution
- Waterproof build handles all weather conditions
- Night vision aids low-light reversing
- 6-metre cable reaches from tailgate to dash
Specifications
No published specifications for this item yet.
Questions about this item
Will the 170-degree viewing angle cover the blind spot on a Hilux 2010-2018?
The 170-degree visible range works great with the blind spot on Hilux models from 2010 to 2018.
Does the CCD sensor overheat or draw extra power during all-day use on a 12 V system?
The camera runs on DC 12 V with a 1/3-inch CCD sensor; no overheating or excessive draw is reported for continuous operation.
Do I already need an aftermarket display with an RCA input for this camera to work?
Yes, the camera connects via universal RCA and does not work well with the original factory monitor; an aftermarket display with RCA input is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



