Theater Solutions
Theater Solutions TSQ670 70V In-Ceiling 6.5" 10-Pack
Ten 70 V in-ceiling speakers with 6.5" woofers, pivoting tweeters, 50 Hz–20 kHz response, 91 dB sensitivity and tool-free spring clamps for 8.4375" cut-outs
- TypeIn-Ceiling Speakers
- 70 V transformer with five tap settings from 1 W to 16 W
- Ten in-ceiling speakers cover large areas with consistent 91 dB sensitivity
- 5 in poly-mica woofers and pivoting silk-titanium tweeters deliver 50 Hz–20 kHz range
- Spring-loaded pressure clamps grip drywall in seconds with no extra hardware
- Paintable ABS frames and removable grilles blend into any ceiling finish
Ten-Speaker Commercial Set
This ten-piece in-ceiling system is built for distributed audio in retail, office or hospitality spaces where a 70 volt line simplifies long cable runs. Each unit includes a built-in transformer so installers can tap power without extra hardware.
70 Volt Taps and Bypass
Five transformer taps at 16, 8, 4, 2 and 1 watt give flexible headroom for background music or paging across multiple zones. A bypass mode lets the same speakers run from a standard low-impedance amplifier when 70 volt distribution is not required.
Quick-Mount Hardware and Paintable Grilles
Spring-loaded pressure clamps secure each speaker into an 8.4375 inch cut-out with a 2.875 inch mounting depth, requiring no separate screws or brackets. The ABS frames and removable grilles accept paint so the installation blends into any ceiling finish.
Highlights
- 70 V transformer with five tap settings from 1 W to 16 W
- Ten in-ceiling speakers cover large areas with consistent 91 dB sensitivity
- 5 in poly-mica woofers and pivoting silk-titanium tweeters deliver 50 Hz–20 kHz range
- Spring-loaded pressure clamps grip drywall in seconds with no extra hardware
- Paintable ABS frames and removable grilles blend into any ceiling finish
Specifications
| Brand | Theater Solutions by Goldwood |
|---|---|
| Model | 5TSQ670 |
| Type | In-Ceiling Speakers |
Questions about this item
Will the TSQ670 70V speakers work with my existing 8-ohm amplifier?
Yes, the built-in 70V transformer can be bypassed for normal 8-ohm use, letting you connect directly to a standard receiver or amp without the transformer taps.
How can I verify the TSQ670 speakers are performing correctly after installation?
Play audio through the system and listen for clear, full-range output across the 50Hz-20kHz frequency response; the 91dB sensitivity at 8 ohms should deliver strong volume with moderate amplifier power.
What comes in the 10-pack box and what extra parts do I need to buy?
The pack includes ten TSQ670 speakers with removable paintable grilles and spring-loaded raw-wire terminals; the Pressure Lock mounting system clamps to drywall without extra hardware, so only speaker wire and a compatible 70V or 8-ohm amplifier are required separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



