Theater Solutions
Theater Solutions TS65C-3S 6.5" in-ceiling home audio speaker 3-piece set
A three-piece in-ceiling set with 6.5" woven-fibre woofers, pivoting silk-titanium tweeters and a 32 Hz–20 kHz frequency range
- TypeIn-Ceiling Speakers
- Wide sound dispersion integrates easily with new or existing audio systems
- 5" woven fiber woofers with butyl rubber surrounds deliver full-range coverage
- Pivoting silk titanium dome tweeters direct high frequencies toward the listening area
- Pressure Lock mounting clamps to drywall with no hardware needed
- Paintable ABS housings and removable grilles match any décor
Three-piece in-ceiling set
The Theater Solutions TS65C-3S provides three 6.5-inch passive speakers for a front left, centre and right home-theatre array. They mount flush in the ceiling and draw power from any receiver or amplifier with raw speaker-wire outputs.
Pressure Lock mounting and paintable grilles
The Pressure Lock system clamps each unit to drywall without separate hardware, fitting a 7.875-inch cut-out and 2.875-inch mounting depth. Removable ABS grilles can be painted to match the surrounding decor.
32 Hz to 20 kHz response with 92 dB sensitivity
Each speaker handles 10 to 200 watts per channel, driven by woven-fibre woofers and pivoting silk-titanium tweeters through 12 dB per octave crossovers. The 8-ohm load suits most amplifiers, but the set lacks a dedicated subwoofer for deeper bass extension.
Highlights
- Wide sound dispersion integrates easily with new or existing audio systems
- 5" woven fiber woofers with butyl rubber surrounds deliver full-range coverage
- Pivoting silk titanium dome tweeters direct high frequencies toward the listening area
- Pressure Lock mounting clamps to drywall with no hardware needed
- Paintable ABS housings and removable grilles match any décor
Specifications
| Brand | Theater Solutions |
|---|---|
| Model | TS65C-3S |
| Type | In-Ceiling Speakers |
Questions about this item
Will the butyl rubber surrounds on the 6.5" woofers need replacement after several years of use?
The butyl rubber surrounds are designed for long-term durability and do not have a specified replacement interval under normal indoor conditions.
At what amplifier power level will the 92dB sensitivity and 8-ohm impedance limit output before distortion?
The speakers handle up to 200 watts per channel; exceeding that rating is the first limit encountered during sustained high-volume playback.
How much heat does the passive crossover generate when the speakers run all day at moderate volume?
The passive 2nd-order crossover produces negligible heat at typical listening levels and requires no active cooling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



