Theater Solutions
Theater Solutions TS30W White On-Wall Speakers 12 Pack
Twelve compact passive speakers with 2.5" drivers, 140 Hz–20 kHz response and 89 dB sensitivity mount on walls for whole-house or surround sound
- TypeOn-Wall Speakers
- Passive design works with any amplifier or receiver
- 12 speakers cover whole-house or surround-sound setups
- 5 inch poly-treated woofers deliver full-range frequency response
- 89 dB sensitivity produces big sound from compact cabinets
- Mounting brackets and hang tabs simplify wall installation
Twelve-Speaker Whole-House Set
The Theater Solutions TS30W pack delivers twelve passive on-wall speakers designed for multi-room audio or immersive home-theatre layouts. Each unit uses a traditional passive architecture that draws power from an external amplifier or receiver through raw speaker wire connections. The white ABS sealed cabinets measure 3.5" high, 3.375" wide and 4.25" deep, allowing discreet placement on walls or shelves. Mounting brackets, hardware and an instruction manual are included for straightforward installation.
Installers Needing Uniform Coverage
This twelve-piece kit suits whole-house audio systems, business background music and surround-sound setups where consistent voicing across many zones is required. The 2.5" poly-treated cone woofers cover 140Hz to 20kHz at 89dB sensitivity and eight-ohm impedance, matching well with amplifiers rated between 20 and 200 watts per channel. Buyers who need weather-resistant outdoor speakers, powered units with built-in amplification or wireless streaming should consider other product lines.
Capacity and Headroom
With twelve drivers the system can fill multiple rooms or a large commercial space with even sound pressure levels. The 140Hz low-frequency limit means music and dialogue remain clear, but deep bass extension is limited without a separate subwoofer. Amplifiers at the lower end of the 20-watt minimum will reach comfortable listening levels in small rooms, while 200-watt capability provides headroom for louder playback in larger areas. CL3 or raw speaker wire completes the connection from amp to each speaker.
Highlights
- Passive design works with any amplifier or receiver
- 12 speakers cover whole-house or surround-sound setups
- 5 inch poly-treated woofers deliver full-range frequency response
- 89 dB sensitivity produces big sound from compact cabinets
- Mounting brackets and hang tabs simplify wall installation
Specifications
| Brand | Theater Solutions |
|---|---|
| Type | On-Wall Speakers |
Questions about this item
What amplifier power range do I need to drive the TS30W speakers?
Each channel must deliver between 20 and 200 watts into 8 ohms to power the 12 passive speakers safely and cleanly.
Can I keep my existing spring-clip speaker wire and use it with these speakers?
Yes, the spring-loaded raw wire connectors accept standard bare-wire or CL3 cable, so your current speaker wire will plug straight in.
How do I confirm the frequency response is performing correctly after installation?
Play a test tone sweep from 140 Hz to 20 kHz and verify smooth output at the rated 89 dB sensitivity level.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



