Theater Solutions
Theater Solutions TS30W 3-piece white on-wall speaker set
Three passive on-wall speakers with 2.5-inch poly-treated woofers covering 140 Hz to 20 kHz at 89 dB, mountable in white sealed cabinets for surround or whole-house audio
- TypeOn-Wall Speakers
- Compact 3.5" height fits tight spaces
- 5" poly-treated woofers deliver full-range sound
- 140 Hz–20 kHz response with 89 dB sensitivity
- Mounting brackets and hardware included for easy install
- Passive design works with 20–200 W amplifiers
Compact three-piece speaker set
The Theater Solutions TS30W provides three passive on-wall speakers finished in white ABS cabinets. Each unit uses a 2.5-inch poly-treated cone woofer to cover a frequency response of 140Hz to 20 kHz at 89dB sensitivity and 8 ohms impedance. They connect via spring-loaded raw wire terminals and include mounting brackets with hardware for straightforward installation.
Suited for multi-room or surround builds
These speakers suit installers adding surround channels to a home theatre or distributing audio through a whole-house system driven by any amplifier with raw speaker outputs. They are not for buyers who need powered speakers with built-in amplification or wireless streaming. They are also not for outdoor installations, as the cabinets are not weather-rated.
Steady output within rated power limits
With a recommended amplifier range of 20 to 200 watts per channel, the set delivers consistent performance during extended listening sessions without thermal compression. The sealed enclosures maintain controlled bass response at the rated 140Hz low-end limit, avoiding the boominess that smaller ported designs can develop over time.
Highlights
- Compact 3.5" height fits tight spaces
- 5" poly-treated woofers deliver full-range sound
- 140 Hz–20 kHz response with 89 dB sensitivity
- Mounting brackets and hardware included for easy install
- Passive design works with 20–200 W amplifiers
Specifications
| Brand | Theater Solutions |
|---|---|
| Type | On-Wall Speakers |
Questions about this item
What amplifier power range is required for the TS30W speakers?
Connect the speakers to any amplifier or receiver that delivers between 20 and 200 watts per channel into 8 ohms.
Can the TS30W speakers reproduce low bass when paired with an existing subwoofer?
The speakers cover 140 Hz to 20 kHz, so a subwoofer handling frequencies below 140 Hz will fill the low-bass gap.
How can I verify the TS30W set is performing correctly after installation?
Play a full-range test signal; each speaker should produce clear output down to 140 Hz at 89 dB sensitivity without distortion.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



