Theater Solutions
Theater Solutions TS30W 14-Pack Home Audio Speakers White
Fourteen mountable passive speakers with 2.5-inch poly-treated woofers deliver 140 Hz–20 kHz frequency response at 89 dB sensitivity for whole-house or surround sound systems
- TypeOn-Wall Speakers
- 14 speakers cover every room in a single pack
- 5″ poly-treated woofers deliver full-range sound from a compact cabinet
- 140 Hz – 20 kHz response with 89 dB sensitivity for clear dialogue and detail
- Spring-loaded connectors accept raw wire for quick amplifier hookup
- Mounting brackets and hardware included for flexible on-wall placement
Fourteen passive speakers for whole-house audio
The Theater Solutions TS30W pack supplies fourteen identical on-wall speakers finished in white ABS. Each unit uses a 2.5-inch poly-treated cone woofer to deliver full-range output from 140 Hz to 20 kHz at 89 dB sensitivity. Spring-loaded raw-wire terminals accept CL3 or bare speaker cable from any amplifier or receiver rated between 20 and 200 watts per channel. The compact 3.5 by 3.375 by 4.25 inch cabinets include hang tabs and mounting brackets with hardware for quick installation.
Upgrade from smaller multi-room sets
A 14-speaker array replaces the piecemeal approach of buying stereo pairs one room at a time, ensuring tonal consistency across every zone. The jump makes sense when a project calls for simultaneous coverage of seven stereo zones — such as a full 7.1 home-theatre plus additional rooms — and the installer wants matching drivers, cabinets and mounting hardware in one shipment. Buyers who need weather-resistant enclosures or powered speakers with built-in amplification should look elsewhere, as these are indoor-only passive models.
Steady output during long listening sessions
Because the drivers are rated for continuous power up to 200 watts per channel, the speakers maintain their 89 dB sensitivity without compression during extended movie marathons or all-day background music in a retail space. The sealed cabinets prevent port turbulence at higher volumes, and the poly-treated cones resist fatigue over years of daily use. No active cooling or protection circuitry is present, so the connected amplifier must supply clean power within the stated 20-to-200 watt window to avoid thermal stress on the voice coils.
Highlights
- 14 speakers cover every room in a single pack
- 5″ poly-treated woofers deliver full-range sound from a compact cabinet
- 140 Hz – 20 kHz response with 89 dB sensitivity for clear dialogue and detail
- Spring-loaded connectors accept raw wire for quick amplifier hookup
- Mounting brackets and hardware included for flexible on-wall placement
Specifications
| Brand | Theater Solutions |
|---|---|
| Type | On-Wall Speakers |
Questions about this item
What wall space does each 3.5" x 3.375" x 4.25" speaker need for the included brackets?
Each speaker measures 3.5 inches high by 3.375 inches wide by 4.25 inches deep; the supplied mounting brackets attach to the rear hang tabs and require only a few centimetres of clearance behind the cabinet.
Which wiring step is most often missed when connecting these passive speakers to an amplifier?
The spring-loaded terminals accept raw speaker wire only; the common mistake is forgetting to strip enough insulation so bare copper seats firmly in both channels before tightening.
What ongoing care do the 2.5" poly-treated woofers and sealed white ABS cabinets require?
Dust the cabinets and grille openings with a soft dry cloth; the sealed enclosures and poly-treated cones need no lubrication, re-coning or driver replacement under normal indoor use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



