We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two white rectangular in-wall subwoofers with removable grilles, flush-mount frames and spring terminals

Theater Solutions

Theater Solutions TS1000 Flush Mount Passive 10" Subwoofer 2 Pack

SKU CH-Z7HN-VPZ2K

A pair of flush-mount passive 10-inch subwoofers covering 22–200 Hz at 92 dB, installing hardware-free with Pressure Lock clamps and paintable grilles

  • TypeSubwoofer
  • Deep bass down to 22 Hz from 10" poly-treated woofers
  • Flush-mount design fits a 10.625" square cutout for clean wall integration
  • Pressure Lock mounting clamps to drywall without separate hardware
  • 92 dB sensitivity at 8 ohms for efficient amplifier pairing
  • Paintable ABS housings and removable grilles blend with any décor

Flush Mount 10" Passive Subwoofer Pair

Two Theater Solutions TS1000 passive subwoofers install flush in walls for home theatre or surround sound systems. Each 10 inch poly treated woofer uses a butyl rubber surround and a second order 12dB per octave crossover. A separate sub amplifier is required for every subwoofer, driven from a receiver with an RCA passive sub output.

Thermal Noise Power

Passive operation means the enclosures generate no amplifier heat and add no fan noise to the room. Power draw is determined entirely by the external sub amplifier you choose, such as the Goldwood WS1005 or SA200. The 92dB sensitivity at 8 ohms allows moderate amplifier levels to reach the 22 to 200Hz frequency response range.

Pressure Lock Mounting Daily Use

Spring loaded raw wire terminals accept CL3 rated in wall speaker wire for a secure connection behind drywall. The Pressure Lock Mounting System clamps each 12.0625 inch square housing into a 10.625 inch square cutout with 3.625 inch mounting depth, requiring no hardware. Durable ABS housings and removable grilles can be painted to match surrounding decor.

Highlights

  • Deep bass down to 22 Hz from 10" poly-treated woofers
  • Flush-mount design fits a 10.625" square cutout for clean wall integration
  • Pressure Lock mounting clamps to drywall without separate hardware
  • 92 dB sensitivity at 8 ohms for efficient amplifier pairing
  • Paintable ABS housings and removable grilles blend with any décor

Specifications

BrandTheater Solutions by Goldwood
TypeSubwoofer

Questions about this item

How do I install the TS1000 subwoofers using the Pressure Lock Mounting System, and what is the common mistake?

Cut a 10.625" x 10.625" hole, ensure 3.625" mounting depth, then press the speaker into the drywall until the clamps engage; the step people miss is verifying the cavity depth before cutting.

What maintenance or replacement will the TS1000 subwoofers need over time?

The 10" poly-treated woofers with butyl rubber surrounds are durable, but the removable grilles may need repainting to match décor changes, and a separate sub amplifier must remain functional for each passive subwoofer.

What limit appears first when the TS1000 subwoofers run at high output for long periods?

The 22-200Hz frequency response and 92dB sensitivity at 8 ohms mean thermal compression in the voice coil will limit sustained output before the 2nd-order 12dB per octave crossover reaches its power handling ceiling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.