We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four square flush-mount subwoofers with white grilles and black frames

Theater Solutions

Theater Solutions TS1000 10" Flush Mount Passive Subwoofer 4 Pack

SKU CH-F0F5-E9Q3G

Four flush-mount 10" passive subwoofers install in 10.625" square wall openings with a 3.625" depth and deliver 22-200 Hz response at 92 dB

  • TypeSubwoofer
  • Deep bass extension down to 22 Hz for impactful low-frequency effects
  • Four 10-inch poly-treated woofers with butyl rubber surrounds deliver durable performance
  • Flush-mount design with Pressure Lock system installs securely without hardware
  • Each passive subwoofer requires a separate sub amplifier for operation
  • Removable grilles and ABS housings can be painted to match any décor

Four passive in-wall subwoofers

The Theater Solutions TS1000 set delivers four 10 inch passive subwoofers designed for flush-mount installation in home theatre or surround sound systems. Each unit uses a poly-treated woofer with a butyl rubber surround and a second-order crossover. A separate subwoofer amplifier is required for every speaker.

Frequency response 22 to 200 Hz at 92 dB sensitivity

The published response range of 22 to 200 Hz at 92 dB and 8 ohms determines whether the system reaches the low-end extension and output level your room requires. This single specification is the primary filter for deciding if the TS1000 matches the acoustic target of your installation.

Four channels of bass with dedicated amplification

Four subwoofers driven by individual amplifiers such as the Goldwood WS1005 or SA200 provide distributed bass coverage across a large listening area. The passive design runs out of headroom when a single amplifier is asked to drive multiple units or when the source lacks a dedicated RCA subwoofer output.

Highlights

  • Deep bass extension down to 22 Hz for impactful low-frequency effects
  • Four 10-inch poly-treated woofers with butyl rubber surrounds deliver durable performance
  • Flush-mount design with Pressure Lock system installs securely without hardware
  • Each passive subwoofer requires a separate sub amplifier for operation
  • Removable grilles and ABS housings can be painted to match any décor

Specifications

BrandTheater Solutions by Goldwood
TypeSubwoofer

Questions about this item

How low does the 22 Hz response reach in a real room?

The 22 Hz figure marks the bottom of the rated frequency range; actual room gain and placement will determine how much output you hear at that frequency.

What does the 8 ohm, 92 dB rating mean for my amplifier choice?

Each subwoofer presents an 8 ohm load and 92 dB sensitivity, so the connected sub amp must be stable at 8 ohms and supply enough power for your target volume.

Will the 10.625 inch square cut-out fit my existing drywall opening?

The speaker requires a 10.625" x 10.625" square hole with 3.625" mounting depth; the 12.0625" square flange covers the cut edge once mounted.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.