Theater Solutions
Theater Solutions 4R4G Granite Grey 4 Rock Speakers
Four passive rock speakers blend into outdoor spaces while delivering 80 Hz–20 kHz sound from 4.5-inch woofers and angled tweeters
- TypeIndoor/Outdoor Speakers
- Weather-resistant build handles rain snow salt ice and pool chemicals
- Upward-angled drivers direct sound toward listeners across the yard
- 5 inch poly mica woofers with butyl rubber surrounds deliver deep bass
- 94dB sensitivity at 8ohm works with 10-125 watt receivers
- Simple CL3 wire connection lets you install the system yourself
Outdoor Rock Speaker Set
The Theater Solutions 4R4G provides four passive rock speakers designed for permanent outdoor installation. Each cabinet mimics natural granite to blend with landscaping around decks, pools, gardens or spa areas. The system targets homeowners who want distributed background audio without visible hardware. Buyers needing battery-powered or truly wireless portable speakers should look elsewhere.
Passive Wired Installation Limits
These speakers require a separate home audio receiver or amplifier delivering 10 to 125 watts per channel at 8 ohms. You must run CL3-rated raw speaker wire from the amplifier to each unit, splicing to the supplied four-inch leads. Use 16-gauge wire for runs under 40 feet and 14-gauge wire for longer distances. No wireless streaming, Bluetooth or built-in amplification is included.
Coverage Capacity and Headroom
Four angled drivers project sound upward at 20 degrees to cover a typical patio or deck zone. Each speaker uses a 4.5-inch poly mica woofer and ferrofluid-cooled soft dome tweeter rated from 80 Hz to 20 kHz at 94 dB sensitivity. The sealed composite cabinets handle rain, snow, salt, ice and pool chemicals. Larger yards or multi-zone setups will need additional speaker pairs and amplifier channels.
Highlights
- Weather-resistant build handles rain snow salt ice and pool chemicals
- Upward-angled drivers direct sound toward listeners across the yard
- 5 inch poly mica woofers with butyl rubber surrounds deliver deep bass
- 94dB sensitivity at 8ohm works with 10-125 watt receivers
- Simple CL3 wire connection lets you install the system yourself
Specifications
| Brand | Theater Solutions by Goldwood |
|---|---|
| Model | 4R4G |
| Type | Indoor/Outdoor Speakers |
Questions about this item
Should I pick the 16 gauge or 14 gauge CL3 wire for my installation?
Use 16 gauge CL3 wire for runs under 40 feet and 14 gauge for runs over 40 feet to each speaker.
What does the 94dB sensitivity at 8 ohms mean when the speakers are connected to my receiver?
The 94dB rating means each speaker plays loudly with modest power, so a 10-125 watt per channel receiver drives them easily to strong volume levels.
How does the passive wired design affect what amplifier I need?
The speakers are passive, so they require a home audio receiver or amplifier supplying 10-125 watts per channel at 8 ohms.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sony ZX Series MDR-ZX110AP Wired On-Ear Headphones White 30mm 3.5mm
- Headphone
usbroway 10-pack VHF Antenna 136-174MHz for Motorola HT1000 MTS2000 XTS2500 XTS3000 XTS3500
- Two-way Radio



