The Wires Zone
The Wires Zone White 6.5" 2-Way In-Ceiling Tilted Speaker Pair 30W RMS 100W Peak 6 Ohms
A pair of 6.5" tilted in-ceiling speakers with 30W RMS power, 6Ω impedance and 55Hz–25kHz response
- TypeIn-Ceiling Speakers
- Sold AsPair
- Remote ControlNo
- ColorWhite
- Tilted design directs sound toward the listening area
- 5" polypropylene-mica woofer delivers deep 55Hz bass
- Swivel 20mm polyetherimide dome tweeter covers up to 25kHz
- 30W RMS and 100W peak handle dynamic soundtracks
- 90dB sensitivity works efficiently with modest amplifiers
Tilted In-Ceiling Pair for Home Audio
The Wires Zone 6.5" two-way speakers mount flush in the ceiling and direct sound downward with a fixed tilt. Each unit pairs a polypropylene-and-mica woofer with a swivelling polyetherimide dome tweeter. The pair delivers 30 watts RMS and 100 watts peak power at 6 ohms impedance. Aluminium micromesh grilles and built-in over-power protection complete the installation kit.
Suited to stereo or surround layouts needing
These speakers suit rooms where the listening position sits off-axis from the ceiling cut-outs. The 55 Hz low-frequency limit means a separate subwoofer is required for full-range movie soundtracks. Installers who need adjustable tilt angles or paintable magnetic grilles should look at other models. The fixed 261 mm finish diameter also limits retrofit options in tighter joist spaces.
30 watts RMS continuous power handling
The RMS rating is the key figure for matching an amplifier that will drive the pair cleanly at normal listening levels. Peak capacity reaches 100 watts for short transients, while the 6 ohm load and 90 dB sensitivity keep the speakers compatible with most mid-range AV receivers. Select an amp that can supply at least 30 watts per channel into 6 ohms for reliable performance.
Highlights
- Tilted design directs sound toward the listening area
- 5" polypropylene-mica woofer delivers deep 55Hz bass
- Swivel 20mm polyetherimide dome tweeter covers up to 25kHz
- 30W RMS and 100W peak handle dynamic soundtracks
- 90dB sensitivity works efficiently with modest amplifiers
Specifications
| Type | In-Ceiling Speakers |
|---|---|
| Sold As | Pair |
| Remote Control | No |
| Color | White |
Questions about this item
Will the 6 ohm impedance work with my older 8 ohm rated amplifier?
Yes, the 6 ohm nominal impedance is compatible with most amplifiers rated for 8 ohm loads; the 30W RMS and 100W peak ratings give ample headroom for typical home theater use.
How can I verify the tilted tweeter is directing sound correctly after installation?
Play pink noise or a familiar track and listen at the primary seating position; the swivel 20mm dome tweeter should produce clear highs up to 25kHz aimed at the listening area.
Does the pair include mounting hardware or must I buy a cutout template separately?
The box contains two speakers and two aluminum micromesh grilles; mounting screws and a 237mm cutout template are not included and must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



