We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Seventeen-foot four-channel RCA cable with gold-plated connectors

The Wires Zone

The Wires Zone 17ft 4-Channel RCA Interconnect Cable

SKU CH-1HRJ-ETYPF

A 17-foot, four-channel RCA interconnect cable with oxygen-free copper twisted-pair conductors and gold-plated connectors for low-noise audio links between amplifiers, stereos or PCs

  • TypeInterconnect Cables
  • 4-channel design routes front and rear signals cleanly
  • 17-foot length reaches amplifiers in larger vehicles
  • Oxygen-free copper strands preserve signal detail
  • Gold-plated connectors resist corrosion for lasting contact
  • Molded strain relief guards against short circuits

4-Channel RCA Interconnect Cable

The 17ft 4-channel RCA interconnect cable uses oxygen-free copper conductors and a twisted-pair design to carry audio signals between source units and amplifiers. Gold-plated locking connectors provide corrosion-resistant contact and maintain consistent pressure. Molded strain relief protects the termination points from mechanical stress. It suits car audio installs and home stereo systems alike.

RCA Interface Practical Limits

The RCA interface carries unbalanced line-level signals and is susceptible to electromagnetic interference over long runs. The twisted-pair construction reduces induced noise from nearby wiring, but the cable cannot eliminate ground-loop hum caused by potential differences between components. Shielding effectiveness depends on the connector shell making full contact with the chassis. Signal loss increases with length and capacitance.

Capacity and Headroom

Four discrete channels support front/rear or bi-amp configurations in a single bundle, simplifying routing through vehicle panels or equipment racks. The 17-foot length reaches from a head unit to a rear-mounted amplifier in most vehicles without excess slack. Gold plating preserves low contact resistance over time, but the cable does not carry speaker-level voltages or digital protocols.

Highlights

  • 4-channel design routes front and rear signals cleanly
  • 17-foot length reaches amplifiers in larger vehicles
  • Oxygen-free copper strands preserve signal detail
  • Gold-plated connectors resist corrosion for lasting contact
  • Molded strain relief guards against short circuits

Specifications

TypeInterconnect Cables

Questions about this item

Should I choose the 17-foot 4-channel cable or a different length for my amplifier install?

The 17-foot length suits most car audio runs from head unit to rear-mounted amplifiers. Measure your exact routing path first; excess cable can be coiled but adds bulk behind dash panels.

How does the twisted-pair construction affect sound quality in my system?

Twisted-pair geometry rejects induced noise from vehicle wiring harnesses, so the signal reaching your amplifier stays clean and the music remains free of alternator whine or ignition static.

What does the gold-plated RCA interface actually guarantee for my connection?

Gold-plated copper contacts resist corrosion and the locking design maintains constant pressure, ensuring a stable, low-resistance path that will not loosen from vibration over time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.