We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

The Perfect Part

The Perfect Part CA96_SAFETAPE Reflective Tape 2" x 50FT Red White DOT-C2

SKU CH-KF97-GMNQR MPN CA96_SAFETAPE

Red and white reflective tape meets DOT-C2 requirements for trailer conspicuity marking

  • TypeMeets DOT-C2 Requirements
  • ColorRed & White
  • Standards/CertificationsCCC-C000352
  • MaterialPVC/PET
  • FeaturesMeets DOT-C2 Requirements; Color: White Red; Material: PVC/P
  • Meets DOT-C2 requirements for trailer conspicuity
  • Red and white hexagonal honeycomb pattern reflects from wide angles
  • PVC/PET construction resists weather and road debris
  • 50-foot roll covers full vehicle length in one piece
  • CCC-C000352 certification confirms compliance with safety standards

DOT-C2 Reflective Tape for Trailers

This red and white reflective tape meets DOT-C2 requirements for trailer conspicuity marking. The hexagonal honeycomb pattern provides three-dimensional reflectivity for improved visibility. It is supplied as a 50-foot roll of PVC and PET material. Fleet operators and trailer owners use it to satisfy federal marking standards.

Outdoor Durability and Application

The PVC and PET construction resists weather exposure on trucks and trailers. No power draw or thermal output is involved because this is a passive safety material. Installation uses the pressure-sensitive adhesive backing on clean, dry surfaces. The roll weighs approximately 14 units for handling and shipping calculations.

Replaces Worn or Non-Compliant Markings

This tape replaces faded, damaged or missing conspicuity striping that no longer meets DOT-C2 standards. The upgrade is worth it when existing markings fail inspection or night-time visibility drops below regulation. It is not suited for buyers who need coloured coding beyond red and white or who require a different width than the supplied two-inch roll.

Highlights

  • Meets DOT-C2 requirements for trailer conspicuity
  • Red and white hexagonal honeycomb pattern reflects from wide angles
  • PVC/PET construction resists weather and road debris
  • 50-foot roll covers full vehicle length in one piece
  • CCC-C000352 certification confirms compliance with safety standards

Specifications

TypeMeets DOT-C2 Requirements
ColorRed & White
Standards/CertificationsCCC-C000352
BrandThe Perfect Part
ModelCA96_SAFETAPE
MaterialPVC/PET
FeaturesMeets DOT-C2 Requirements; Color: White Red; Material: PVC/PET; Size: 2” x 50FT
Part NumberCA96_SAFETAPE

Questions about this item

How do I apply the 2-inch wide CA96_SAFETAPE correctly, and what surface-preparation step is most often skipped?

Clean the trailer or truck surface with isopropyl alcohol, let it dry fully, then press the PVC/PET tape firmly along its full 50-foot length; skipping the alcohol wipe leaves residue that causes edges to lift.

What part of the CA96_SAFETAPE will need replacement first as it ages outdoors?

The hexagonal honeycomb three-dimensional reflective layer on the PVC/PET film degrades from UV exposure and road grit, so the tape itself is the item you will eventually replace.

At what point does the DOT-C2 reflectivity of the CA96_SAFETAPE drop below the required level during continuous highway use?

The CCC-C000352 certification confirms initial DOT-C2 compliance; sustained reflectivity loss depends on sun, salt and abrasion, so inspect the red and white segments regularly and replace when night visibility noticeably fades.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.