We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

The Perfect Part

The Perfect Part 2×60 cm sequential LED DRL turn signal strip car electronics accessory

SKU CH-1CK2-8QD9G

Two 60 cm flexible silicone strips provide white daytime running light and amber sequential turn signals at 12 V

  • Typecar
  • FeaturesTurn signal lights Light up in flowing sequentially; Daytime
  • ColorBlack
  • MaterialSoft Silicone
  • Size/Dimensions60cm x 15mm x 3mm
  • VoltageDC 12V
  • Sequential amber turn signals improve side visibility
  • Cool white daytime running light adds forward presence
  • Soft silicone housing conforms to curved headlight lenses
  • Two 60 cm strips cover both sides evenly
  • 12 V DC power suits standard vehicle electrics

Two 60 cm sequential LED strips

This accessory combines daytime running lights with sequential amber turn signals in a single flexible strip. Each unit measures 60 cm by 15 mm by 3 mm and operates on a 12 V DC supply. The soft silicone housing allows the strip to follow headlight contours during installation. Two strips are included for left and right headlight fitment.

Flowing turn signal under continuous use

The amber LEDs illuminate in a flowing water sequence when the turn signal is activated, rather than flashing all at once. Cool white LEDs serve as the daytime running light and remain lit while the vehicle is running. Both functions share the same low-profile strip, so heat output stays consistent during extended driving periods. The silicone material resists vibration and temperature cycling without degrading the light pattern.

Check headlight space and wiring before ordering

Verify that each headlight housing has at least 60 cm of continuous mounting surface for the strip. Confirm the vehicle uses a 12 V electrical system and identify the correct DRL and turn signal wires for tapping. The flexible silicone requires a clean, curved surface for proper adhesion. Buyers who need a shorter strip length or a non-sequential flashing pattern should look for a different product.

Highlights

  • Sequential amber turn signals improve side visibility
  • Cool white daytime running light adds forward presence
  • Soft silicone housing conforms to curved headlight lenses
  • Two 60 cm strips cover both sides evenly
  • 12 V DC power suits standard vehicle electrics

Specifications

BrandThe Perfect Part
ModelDA129_LED_DRL_HL
Typecar
FeaturesTurn signal lights Light up in flowing sequentially; Daytime Running Light + Turn Signal; Soft Silicone; Color: Cool White / Yellow (Turn Signal); Material: Soft Silicone; Dimensions: 60cm x 15mm x 3mm
ColorBlack
MaterialSoft Silicone
Size/Dimensions60cm x 15mm x 3mm
VoltageDC 12V

Questions about this item

How much power does each 60 cm strip draw when the sequential turn signal runs all day?

Each strip operates on DC 12 V; the sequential amber LEDs draw a low current typical for flexible silicone DRLs, so heat stays minimal during continuous use.

What existing wiring or controller must the vehicle already have for these strips to function?

The strips need a 12 V supply switched with the ignition for the cool-white DRL and a separate 12 V feed from the factory turn-signal circuit to trigger the sequential amber flow.

Will the 15 mm wide silicone strips fit inside a headlight housing that currently uses a 129 mm halogen bulb?

At 15 mm wide and 3 mm thick the flexible strips can be routed around a 129 mm bulb cavity, but you must verify the housing depth and lens clearance before bonding.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.