We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black braided PWM fan splitter cable, 4-pin to 3-pin and 4-pin, 10.5 inches

THE ORDINARY

THE ORDINARY 1007 PWM fan splitter cable 10.5 inches 4 pin to 3 pin and 4 pin

SKU CH-SCKN-PKWG5 MPN 1007

Connects three fans to one motherboard header using a 4-pin to 3-pin and 4-pin splitter with 10.5-inch braided sleeved cable

  • FeaturesHIGH QUALITY: The fan PWM splitter Y-cable for PC motherboar
  • Sleeve protects wires from dust and breakage
  • 5 inch length reaches fans across the case
  • 4-pin motherboard plug splits to three fan headers
  • PWM signal passes through for automatic speed control
  • Tinned copper conductors rated to 80 °C

Splitter cable for three fans

The Ordinary 1007 PWM fan splitter cable connects one motherboard header to three case fans. It uses a 4-pin female plug on the motherboard side and splits into two 3-pin and one 4-pin connectors. The 10.5-inch length suits compact or mid-tower builds. The cable is braided and sleeved for durability.

PWM control limited to the 4-pin fan

Only the single 4-pin fan connector returns a tachometer signal to the motherboard, so PWM speed control applies to that fan alone. The two 3-pin connectors receive voltage control only, which may limit low-speed precision. Builders who need independent PWM curves for every fan cannot achieve that with this splitter.

One 4-pin header drives three fans

The splitter lets three fans share one motherboard fan header, drawing combined power through that single connection. The 24 AWG tinned-copper conductors are rated for 80 °C. Buyers whose fans exceed the header’s current rating should not use this cable.

Highlights

  • Sleeve protects wires from dust and breakage
  • 5 inch length reaches fans across the case
  • 4-pin motherboard plug splits to three fan headers
  • PWM signal passes through for automatic speed control
  • Tinned copper conductors rated to 80 °C

Specifications

FeaturesHIGH QUALITY: The fan PWM splitter Y-cable for PC motherboard cooling fans are constructed using high-quality material, measures 10.5 inches in length and cable is strongly braided, sleeved and wrapped to provide long-lasting performance as well as to avoid dust and breakage. 2-WAY MOTHERBOARD: The PWM fan cable is designed with a 4-pin female connector on the one end and on the other end it splits into two 3-pin & one 4-pin connector; the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case. MANY FUNCTIONS: Th

Questions about this item

How long is the splitter cable and does it fit a standard motherboard header?

The cable measures 10.5 inches and connects a single 4-pin motherboard header to three fan connectors.

Can all three fans run under PWM control at once?

One 4-pin fan receives full PWM control while the two 3-pin fans run at constant voltage from the same header.

What wire gauge and insulation are used on the 1007 model?

It uses 24 AWG tinned copper conductors with PVC insulation rated to 80 °C.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.