The Install Bay
The Install Bay SL-DLA 5 Long 5/8 Thick Slim cable Door Lock Actuator 2 Wire car electronics accessory
Slim two-wire door-lock actuator adds electric lock and unlock to most vehicles and fits tight spaces where standard units cannot
- TypeParking
- Adds electric lock/unlock to doors with a 2-wire actuator
- Fits most vehicles and works with all alarm systems
- Mounting hardware included for straightforward installation
- Slim 5/8 in thick design installs where standard actuators cannot
- Extends to 5 5/8 in for reliable door-latch operation
Slim Door Lock Actuator
The Install Bay SL-DLA is a two-wire door lock actuator designed to add electric lock and unlock function to vehicle doors. Its slim profile measures five inches long and five-eighths of an inch thick, extending to five and five-eighths inches when fully actuated. The unit includes all mounting hardware required for installation. It is built to meet or exceed stringent industry standards for automotive accessories.
Fitment and Limits
This actuator suits owners adding power locks to a vehicle or replacing a failed unit where space behind the door panel is tight. It works with most vehicles and all common alarm systems. Buyers needing a heavier-duty actuator for high-frequency fleet use or a different stroke length should look at other options. The two-wire design also means it cannot directly replace factory units that require a five-wire or CAN-bus interface.
Included Hardware
The package supplies the mounting brackets, screws and clips needed to secure the actuator inside the door cavity. No separate hardware kit is required, which reduces installation time and prevents trips to the hardware store. The bundled hardware is specific to this actuator’s slim form factor, so it fits the narrow mounting points without modification. No wiring harness, relay or control module is included.
Highlights
- Adds electric lock/unlock to doors with a 2-wire actuator
- Fits most vehicles and works with all alarm systems
- Mounting hardware included for straightforward installation
- Slim 5/8 in thick design installs where standard actuators cannot
- Extends to 5 5/8 in for reliable door-latch operation
Specifications
| Type | Parking |
|---|
Questions about this item
What wiring harness or control module do I need to connect the two-wire actuator to my car's locking system?
You need a two-wire lock/unlock output from an alarm system, keyless-entry module or relay pack; the actuator itself includes only the mounting hardware.
Will the 5-inch long, 5/8-inch thick body fit alongside the factory rods and latch mechanism in a tight door cavity?
Its slim profile is designed for shallow cavities where standard actuators cannot fit, but you must verify the 5-inch retracted and 5 5/8-inch extended lengths against your specific door interior.
How can I confirm the actuator is locking and unlocking correctly after I wire it up?
Operate the alarm or keyless remote and watch the door lock knob or latch lever move through its full 5 5/8-inch stroke; the lock should engage cleanly at both ends of travel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



