We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
The Install Bay IBR114 USB-A 3.0 and USB-C flush mount charger with water-resistant cover

The Install Bay

The Install Bay IBR114 USB-A 3.0 USB-C charge data flush mount car electronics accessory

SKU CH-NVSE-BF9DV

A flush-mount charger with USB-A 3.0 and USB-C ports for power and data, plus a water-resistant cover and converter

  • TypeCharger Mount
  • Charge and transfer data through USB-A 3.0 and USB-C ports
  • Flush-mount 26 mm cutout keeps dashboard clean
  • Surface-mount option and water-resistant cover add versatility
  • USB-C to USB-A converter included for legacy devices
  • Three-foot cable reaches most vehicle power sources

Flush-mount USB charger 26 mm

The Install Bay IBR114 adds a USB-A 3.0 port and a USB-C port to a vehicle dashboard through a 26 mm cutout. Both ports deliver charge and data, and a USB-C to USB-A convertor is supplied. A surface-mount option and water-resistant cover are included for alternative installations. The 3 ft cable provides flexible routing behind the panel.

Drivers who want modern ports in a factory look

This accessory suits owners who need USB-A 3.0 and USB-C connectivity without replacing the head unit. The flush design keeps the dashboard clean and the water-resistant cover protects the ports when not in use. Buyers who require Power Delivery negotiation or Quick Charge support should look at a dedicated fast-charge module instead. Installers without a 26 mm hole saw will need to acquire one separately.

Single specification that decides fit

The 26 mm flush-mount cutout diameter determines whether the charger fits the chosen panel location. Measure the available opening before purchase; a larger or smaller hole will not work with the supplied hardware. The 3 ft (1 m) cable length then dictates how far the rear connector can sit from the mount point. If either dimension does not match the vehicle, the part cannot be installed.

Highlights

  • Charge and transfer data through USB-A 3.0 and USB-C ports
  • Flush-mount 26 mm cutout keeps dashboard clean
  • Surface-mount option and water-resistant cover add versatility
  • USB-C to USB-A converter included for legacy devices
  • Three-foot cable reaches most vehicle power sources

Specifications

TypeCharger Mount

Questions about this item

What size hole does the 26 mm flush mount need?

Drill a 26 mm diameter cut-out; the flange then sits flush with the panel surface.

Which step do installers most often skip when fitting the water-resistant cover?

They forget to seat the cover gasket before tightening the retaining ring, so moisture can enter.

When should the 1 m charge-and-data cable be replaced?

Replace it if the USB-C or USB-A connectors become loose, the jacket shows cracking, or data transfer becomes unreliable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.