THE CIMPLE CO
THE CIMPLE CO RG11 Coaxial Cable 50 FT 2 in 1 accessory
A 50-foot RG11 coaxial cable with 14 AWG solid conductor, dual shielding and weather-sealed F-type connectors for indoor or outdoor TV, satellite and internet use
- Watertight F-type compression connectors that will not deteriorate over time
- Suitable for indoor and outdoor use with UV-coated connectors and PVC jacket
- Compatible with cable modems, TVs, satellite receivers, radios and multiple antenna types
- 75-ohm cable swept to 3.0 GHz maintaining signals down to 2.3 MHz
- 14 AWG solid center conductor with aluminum braiding and shielding for interference-free signals
RG11 Coaxial Cable 50 FT
This 50-foot RG11 coaxial cable uses F-type compression connectors to deliver a secure, watertight link that resists deterioration. The 75-ohm construction is swept to 3.0 GHz and supports frequencies down to 2.3 MHz for both digital and analog signals. A 14 AWG solid center conductor with aluminum braiding and shielding minimises interference across the 15-metre run.
Indoor and outdoor installations
The UV-coated connectors and PVC jacket suit permanent outdoor routing as well as indoor runs for TV antennas, satellite dishes, cable modems and CATV systems. Installers who need plenum-rated cable or a different impedance should look at alternative specifications not covered by this product.
F-type connector compatibility
Verify that each device in the chain accepts standard F-type compression fittings before ordering. Confirm the 75-ohm impedance matches the existing cabling infrastructure to avoid signal reflections.
Highlights
- Watertight F-type compression connectors that will not deteriorate over time
- Suitable for indoor and outdoor use with UV-coated connectors and PVC jacket
- Compatible with cable modems, TVs, satellite receivers, radios and multiple antenna types
- 75-ohm cable swept to 3.0 GHz maintaining signals down to 2.3 MHz
- 14 AWG solid center conductor with aluminum braiding and shielding for interference-free signals
Specifications
No published specifications for this item yet.
Questions about this item
Which devices must already have F-type ports to connect this 50 ft RG11 cable?
Cable modems, televisions, satellite receivers, radios, HD antennas, FTA or OTA antennas, wireless antennas and CATV systems all use the F-type interface this cable provides.
Will the 75-ohm impedance and 3.0 GHz sweep of this RG11 cable degrade signals from older analog equipment?
The cable is compatible with both digital and analog signals and maintains performance down to 2.3 MHz, so legacy gear works without degradation.
How can I verify the 14 AWG solid center conductor and dual shielding are delivering a clean signal after installation?
Check for stable modem sync rates, clear TV picture without pixelation, and consistent signal strength readings on connected devices.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



