We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Teradek Bolt 6 XT 750 wireless transmitter with 12G-SDI and HDMI connections

Teradek

Teradek Bolt 6 XT 750 12G-SDI/HDMI Wireless Transmitter

SKU CH-SZKK-FE01H

Wireless transmitter sends 4Kp60 10-bit video up to 750 feet with less than .001 second latency and AES-256 encryption

  • Transmits up to 750 feet line of sight for reliable on-set monitoring
  • Near-zero latency under 0.001 seconds ensures real-time video for live production
  • Supports 4Kp60 10-bit video delivering pristine image quality for critical review
  • AES-256 encryption with RSA-1024 key exchange provides secure interference-free transmission
  • Operates on 6 GHz band with 12 new channels reducing congestion in high-traffic areas

Professional Video Transmitter

The Teradek Bolt 6 XT 750 is a professional wireless video transmitter designed for on-set monitoring and remote viewing. It sends 4Kp60 10-bit video up to 750 feet line of sight with latency under 0.001 seconds. AES-256 encryption and RSA-1024 key exchange secure the signal. It suits camera operators and directors needing real-time, colour-accurate monitoring without cables.

Upgrade From Cabled Or Older Wireless

This unit replaces tethered SDI or HDMI runs and earlier wireless systems that operate on crowded lower bands. The jump is worth it when productions need 6 GHz spectrum access, 12 additional channels, and faster reconnection in high-traffic environments. It also passes metadata, timecode and start/stop flags from most cameras. Buyers who only need short-range HD monitoring or lack 6 GHz regulatory clearance will not benefit.

6 GHz Spectrum And Interface Limits

The transmitter uses the newly opened 6 GHz wireless frequency to reduce interference and improve image stability. Practical limits include strict line-of-sight requirements for the 750 foot (228.6m) maximum range and dependence on regional 6 GHz regulations. The integrated 5-pin USB port enables wireless camera control with compatible SmallHD Smart Monitors only. Units without 6 GHz support or compatible monitor ecosystems cannot use these features.

Highlights

  • Transmits up to 750 feet line of sight for reliable on-set monitoring
  • Near-zero latency under 0.001 seconds ensures real-time video for live production
  • Supports 4Kp60 10-bit video delivering pristine image quality for critical review
  • AES-256 encryption with RSA-1024 key exchange provides secure interference-free transmission
  • Operates on 6 GHz band with 12 new channels reducing congestion in high-traffic areas

Specifications

No published specifications for this item yet.

Questions about this item

What 5-pin USB port is on the Bolt 6 XT transmitter for camera control?

The integrated 5-pin USB port enables wireless camera-control setup when paired with SmallHD Smart Monitors, allowing remote adjustment of camera settings without cables.

How do you configure the Bolt 6 XT transmitter using the Bolt Manager App?

Install the Bolt Manager App on iOS or Android, power on the transmitter, connect via the app, then select one of the 12 available 6 GHz channels and pair with a compatible receiver for zero-delay video.

Does the Bolt 6 XT transmitter need firmware updates for metadata and timecode support?

Yes, firmware updates delivered through the Bolt Manager App add or improve metadata, timecode, and start/stop flag pass-through for specific camera manufacturers over time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.