We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Teradek 16 inch LEMO to Fischer straight angled run stop cable

Teradek

Teradek 16" LEMO-Fischer Run/Stop Cable #11-1375

SKU CH-PN47-YT1MA

Connects RT Latitude MDR Receiver to ARRI cameras with RS ports via 16" LEMO-Fischer cable

  • Connects RT Latitude MDR Receiver to ARRI RS port
  • 16-inch straight-angled design eases routing on rigs
  • Durable LEMO-Fischer build withstands production demands
  • Trusted Teradek craftsmanship for reliable run/stop control
  • Model 11-1375 ensures correct part identification

Teradek 16″ LEMO-Fischer Run/Stop Cable

This 16-inch cable connects an RT Latitude MDR Receiver to an ARRI camera with an RS port. It provides a physical link for run/stop control in professional film and television productions. The straight-angled connectors are built for durability on demanding sets. It is a specialised accessory for camera operators and DITs managing remote start/stop functions.

Connector and length constraints

The fixed 16-inch length and specific LEMO-to-Fischer pin-out limit placement to short-range connections between the receiver and camera body. It cannot bridge longer distances or adapt to other port types without additional adapters. The cable carries only the run/stop signal; it does not transmit audio, video or power. Users needing extended reach or multi-function cabling must look elsewhere.

Simple plug-in installation

Installation requires aligning and pushing each connector into its matching port until the latch engages. The straight-angled ends reduce strain but can snag in tight rigging if cable routing is not planned. Misaligned pins or forced insertion are the most common causes of intermittent triggering. No tools or configuration are needed beyond a secure mechanical connection.

Highlights

  • Connects RT Latitude MDR Receiver to ARRI RS port
  • 16-inch straight-angled design eases routing on rigs
  • Durable LEMO-Fischer build withstands production demands
  • Trusted Teradek craftsmanship for reliable run/stop control
  • Model 11-1375 ensures correct part identification

Specifications

No published specifications for this item yet.

Questions about this item

Which connector combination does the 16" run/stop cable use?

The cable has a straight LEMO plug on one end and an angled Fischer connector on the other, matching the RT Latitude MDR receiver to an ARRI RS port.

What does the 16" length mean when the cable is rigged on a camera?

At 16 inches the cable reaches from a body-mounted receiver to the camera RS port without excess slack, keeping the run/stop trigger tidy on a compact rig.

What signals does the LEMO-to-Fischer run/stop cable carry?

It carries the run/stop trigger signal between the RT Latitude MDR receiver and an ARRI camera RS port; it does not transmit audio or video.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.