We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
New Teq TEQ-Z781N projector lamp module with 210W UHP bulb in housing

Teq

Teq TEQ-Z781N projector lamp 210W 5000 Hrs

SKU CH-0A8E-6SWRQ

A 210 W projector lamp module rated for 5,000 hours, supplied as a complete housing for quick replacement

  • TypeProjector Lamp
  • Wattage210W
  • Lamp Life5,000 Hrs.
  • Ready to install with pre-assembled bulb and housing
  • 210W UHP lamp delivers specified brightness
  • 5,000-hour rated life supports extended use
  • Manufactured to ISO 9001 quality standards
  • Compatible with TEQ projectors using Z781N module

TEQ-Z781N 210W replacement lamp

The TEQ-Z781N is a new 210W replacement projector lamp module that includes a Philips UHP bulb pre-assembled in its housing. It is designed for users who need a ready-to-install light source for compatible TEQ projectors without sourcing a bare bulb. The lamp is rated for 5000 hours of operation. It meets ISO9001 manufacturing standards and undergoes checks for beam performance, ignition, voltage and run-time.

Upgrade from a dim or expired original lamp

This module replaces the factory-fitted lamp when brightness has faded or the hour counter has reached its limit. The jump is worth it when the projected image has become noticeably dull or the projector warns that the lamp is near end of life. Buyers who need a higher-wattage or longer-life module than 210W and 5000 hours cannot be served by this part.

Simple housing swap with no bulb handling

Installation consists of removing the old lamp housing and inserting the new assembly, so no bare bulb handling or alignment is required. What usually goes wrong is forgetting to reset the projector's lamp-hour counter after fitting the module, which can leave the replacement lamp unrecognised or trigger premature warnings. Ensure the housing seats fully and the retaining screws are secure before powering on.

Highlights

  • Ready to install with pre-assembled bulb and housing
  • 210W UHP lamp delivers specified brightness
  • 5,000-hour rated life supports extended use
  • Manufactured to ISO 9001 quality standards
  • Compatible with TEQ projectors using Z781N module

Specifications

BrandTEQ
TypeProjector Lamp
Wattage210W
Lamp Life5,000 Hrs.

Questions about this item

Does the TEQ-Z781N lamp module ship as a complete housing so I can mount it without extra assembly?

Yes, the module arrives with the Philips UHP 210W bulb already fitted in its housing, so you simply slot the whole unit into the projector.

Which screw or latch do I release first when swapping the old TEQ-Z781N lamp, and what do people forget?

Most TEQ projectors use a single captive screw on the lamp door; the step users miss is resetting the lamp-hour counter in the menu after the new module clicks in.

How often will I need to replace the Philips UHP 210W bulb inside the TEQ-Z781N housing?

The lamp is rated for 5,000 hours of typical use; after that the brightness drops and you install a fresh TEQ-Z781N module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.