Tennsco
Tennsco BPB-72-48 Tool Storage 72 in W 48 in D Industrial Gray
Heavy-duty steel shelving unit measuring 72 in wide by 48 in deep with a 2,750 lb load capacity
- TypeShelving
- 2,750 lb load capacity supports heavy equipment
- 72 in width provides expansive storage space
- 48 in depth accommodates large items
- 14-gauge steel frame ensures structural rigidity
- Epoxy-coated finish resists corrosion and wear
Tennsco BPB-72-48 Industrial Shelving
The Tennsco BPB-72-48 is a heavy-duty steel shelving unit finished in industrial gray epoxy. It measures 72 inches wide by 48 inches deep with a 3 5/8 inch profile. The frame uses 14-gauge steel and meets SCS standards for structural integrity. It ships with two 48-inch beams, two 72-inch beams, three 48-inch cross bars and all required mounting hardware.
Suits workshops needing high-capacity open shelving
This unit supports a 2,750 lb load capacity, making it suitable for garages or warehouses storing heavy equipment or bulk supplies. The open beam design allows easy access from multiple sides. Buyers who need enclosed cabinets, integrated decking or smaller footprints should look at alternative storage configurations. The fixed dimensions require a clear 72 by 48 inch floor area.
Bolt-together assembly with included hardware
All mounting hardware is supplied so no separate fastener purchase is necessary. The beams and cross bars connect using standard bolts, typically requiring basic hand tools and two people for safe handling. The most common issue is misaligning the cross bars during tightening, which can prevent the frame from squaring correctly. Ensure the floor is level before final torque.
Highlights
- 2,750 lb load capacity supports heavy equipment
- 72 in width provides expansive storage space
- 48 in depth accommodates large items
- 14-gauge steel frame ensures structural rigidity
- Epoxy-coated finish resists corrosion and wear
Specifications
| Brand | TENNSCO |
|---|---|
| Type | Shelving |
Questions about this item
What uprights do I need to already own to mount the 72 in wide beams?
The beams are designed for Tennsco uprights with standard beam slots; the hardware included bolts directly to those uprights without extra brackets.
Will the 14 ga cross bars support the same 2,750 lb load as the main beams?
The cross bars add lateral stability and help distribute weight across the shelf, but the 2,750 lb capacity rating applies to the complete beam pair assembly.
How can I verify the shelf is level and locked in after installation?
Check that all four beam-to-upright connections are fully seated, the epoxy-coated frame sits flush, and the cross bars are tight; a level across the 72 in width should read even.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
