We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange infrared thermometer gun with dual laser pointers

TempPro TP450 Infrared Thermometer Gun Dual Laser Orange

SKU CH-VW48-48K2M

Non-contact infrared thermometer gun with dual laser targeting, 16:1 distance-to-spot ratio and adjustable emissivity from 0.10 to 1.00 for accurate surface readings from -58 to 1022 °F

  • ColorOrange
  • Safe non-contact scanning from distance with 16:1 spot ratio
  • Dual laser targeting plus adjustable emissivity 0.10-1.00 for precise aiming
  • High accuracy ±1.5% across -58°F to 1022°F range
  • Ultra-fast 0.5s response captures rapid temperature changes instantly
  • MAX MIN AVG tracking monitors fluctuations for cooking and diagnostics

TempPro TP450 dual-laser infrared thermometer

The TempPro TP450 is a non-contact infrared thermometer gun built for surface-temperature checks on pizza ovens, grills, HVAC vents and automotive components. Its dual-laser targeting and adjustable emissivity from 0.1 to 1.0 let home chefs, grilling enthusiasts and DIY hobbyists measure different materials with an accuracy of ±1.5% across a range of -58°F to 1022°F. It is not suitable for body-temperature measurements.

Installation and common issues

Insert the two supplied AAA batteries, select °C or °F, then point the gun at the target; the dual lasers outline the measurement spot and the reading appears in 0.5 seconds. The main mistake is leaving emissivity at the default 0.95 when measuring shiny metal or glass, which skews results; set emissivity between 0.10 and 1.00 to match the surface. Holding the trigger too close reduces the 16:1 distance-to-spot advantage, so keep enough distance for the spot size you need.

Pre-order checks

Verify you only need surface-temperature readings on inanimate objects, because this device cannot measure human body temperature accurately. Confirm the -50°C to 550°C range covers the highest heat you plan to monitor, such as oven interiors or engine parts. Ensure you can work in °C or °F as required, and that the orange handheld form factor suits your workspace and storage.

Highlights

  • Safe non-contact scanning from distance with 16:1 spot ratio
  • Dual laser targeting plus adjustable emissivity 0.10-1.00 for precise aiming
  • High accuracy ±1.5% across -58°F to 1022°F range
  • Ultra-fast 0.5s response captures rapid temperature changes instantly
  • MAX MIN AVG tracking monitors fluctuations for cooking and diagnostics

Specifications

ColorOrange

Questions about this item

How do I verify the TempPro TP450 is measuring correctly after setup?

Point the dual lasers at a surface of known temperature, set the emissivity between 0.10 and 1.00 to match the material, and confirm the reading falls within ±1.5% of the expected value.

What comes in the box with the TempPro TP450 and what must I buy separately?

The package includes the infrared thermometer gun, two AAA batteries, and a user manual. No additional items are required for immediate operation.

Which emissivity setting should I choose on the TempPro TP450 for different surfaces?

Adjust the emissivity from 0.10 to 1.00 to suit the material; the default is 0.95, which works for most organic or painted surfaces, while lower values suit shiny metals.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.