We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tempco TSP02792 screw plug immersion heater, 316 stainless steel, 1000 watt 120 volt

Tempco

Tempco TSP02792 Screw Plug Immersion Heater 1000 W 120 V 316 SS 6-3/8 in

SKU CH-8QEG-E078F

A 1000 W, 120 V screw plug immersion heater with a 316 stainless steel sheath and 91.51 W/sq in watt density for corrosive liquids

  • 1000 W output heats liquids quickly
  • 120 V single-phase supply fits standard circuits
  • 316 stainless steel sheath resists corrosion
  • 51 W/sq in density enables efficient heat transfer
  • 6-3/8 in immersion depth suits compact tanks

Screw Plug Immersion Heater 1000 W

The Tempco TSP02792 is a screw plug immersion heater rated at 1000 W and 120 V AC single phase. It suits industrial tanks and process vessels that need direct liquid heating with a compact threaded fitting.

316 Stainless Steel sheath and plug

Both the sheath and the screw plug are made from 316 stainless steel for corrosion resistance when used with aggressive fluids. The 1 in NPT thread mounts directly into a standard tank opening, while the NEMA 1 enclosure protects the wiring compartment in dry indoor locations.

Check voltage phase and immersion depth

Verify that your supply is 120 V AC single phase before wiring the unit. The minimum immersion depth is 6 3/8 in, so the liquid level must stay above that mark to prevent element exposure. Ensure the tank opening accepts a 1 in NPT fitting.

Highlights

  • 1000 W output heats liquids quickly
  • 120 V single-phase supply fits standard circuits
  • 316 stainless steel sheath resists corrosion
  • 51 W/sq in density enables efficient heat transfer
  • 6-3/8 in immersion depth suits compact tanks

Specifications

BrandTEMPCO

Questions about this item

What does the 120 V 1-phase rating mean for the heater's power delivery?

The heater runs on a standard 120 V AC single-phase supply and delivers 1,000 W at 91.51 W/sq in watt density.

What fitting and clearance does the 1 in NPT screw plug require?

It needs a 1 in NPT threaded opening and at least 6 3/8 in of immersion depth inside the tank.

How is the NEMA 1 enclosure wired during installation?

Connect the corrosion-resistant wiring hardware inside the NEMA 1 enclosure following the heater's internal terminal layout.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.