Tempco
Tempco PCT10001 Analog HVAC Control 120V 15A 60-250F
Analog HVAC controller with bulb sensor, 120 V AC input, 15 A relay output and 60 to 250 °F range
- ColorTransparent
- Analog on/off control for simple HVAC regulation
- 60–250 °F range covers heating and cooling needs
- 15 A relay output handles direct load switching
- 120 V AC input suits standard mains supply
- CE, CSA and UL listed for safety compliance
Analog Temperature Controller for HVAC Systems
The Tempco PCT10001 is an analog temperature controller designed for HVAC applications requiring simple on/off regulation. It operates on a 120V AC supply and switches loads up to 15 amps via an internal relay. The unit covers a temperature range of 60 to 250 degrees Fahrenheit using a bulb sensor. This device suits technicians and facility managers needing straightforward, reliable temperature management.
Suitable for Basic On/Off Regulation Needs
This controller fits installations where basic on/off action with a typical 4-degree hysteresis is acceptable. It includes a 6-foot power cord and carries CE, CSA, and UL safety standards. Buyers who need alarm outputs, programmable logic, digital readouts, or communication interfaces should look at other models. The analog design does not support advanced control strategies or remote monitoring capabilities.
15 Amp Relay Output at 120V AC
The single specification that determines suitability is the 15 amp relay output rating at 120V AC. The connected heating or cooling equipment must not exceed this current draw. The controller measures 14 inches long by 6 inches wide by 6 inches deep. Verify the load requirements and available mounting space before purchase to ensure proper operation.
Highlights
- Analog on/off control for simple HVAC regulation
- 60–250 °F range covers heating and cooling needs
- 15 A relay output handles direct load switching
- 120 V AC input suits standard mains supply
- CE, CSA and UL listed for safety compliance
Specifications
| Brand | TEMPCO |
|---|---|
| Color | Transparent |
Questions about this item
Will the PCT10001 fit alongside my existing 120V relay panel?
The controller measures 14 in long by 6 in wide by 6 in deep and operates on 120V AC, so it can sit beside a standard relay panel without voltage mismatch.
How do I confirm the PCT10001 is regulating temperature correctly after wiring it?
Set the dial within the 60 to 250 degrees F range; the 15 A relay will click on and off with a typical 4-degree hysteresis, showing the control loop is active.
Does the PCT10001 include a mounting bracket or must I buy one separately?
The unit ships with a 6-ft cord attached; no bracket is included, so you will need to supply your own DIN-rail or surface-mount hardware.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
