We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tempco MXH01930 band heater with terminal box and armored leads

Tempco

Tempco MXH01930 Band Heater 277V 750W 650°F

SKU CH-MTXW-3ZTTN

Band heater with 4-inch inside diameter, 277 VAC operation, 750 W output and 650 °F maximum temperature

  • 277 VAC power supply enables reliable industrial heating
  • 750 W output delivers 35 W/sq in watt density for efficient thermal transfer
  • 650 °F maximum temperature suits high-heat process applications
  • Terminal box with 36 in lead wire and 34 in galvanized armor cable simplifies safe installation
  • Aluminium extrusion construction provides durable heat distribution across 4 in inside diameter

Industrial Band Heater for Cylindrical Surfaces

The Tempco MXH01930 band heater wraps a 4-inch inside diameter cylinder with a 1-1/2-inch wide aluminum extrusion. It delivers 750 watts at 277 VAC for process heating up to 650 degrees F. The unit includes a terminal box with 36-inch lead wires protected by 34-inch galvanized armor cable.

Sustained Load Behaviour

At the rated 35 watts per square inch the sheath temperature stabilises near the 650-degree F limit during continuous operation. The 3.13-amp draw remains steady once thermal equilibrium is reached. Width tolerance of plus or minus 3/32 inch ensures consistent contact pressure for repeatable heat transfer over long cycles.

Pre-Order Checks

Verify the supply voltage is 277 VAC single-phase and that the circuit can supply at least 3.13 amps. Confirm the heated cylinder measures exactly 4 inches inside diameter so the band seats without gaps. Ensure the mounting location allows clearance for the terminal box and the 34-inch armor cable run.

Highlights

  • 277 VAC power supply enables reliable industrial heating
  • 750 W output delivers 35 W/sq in watt density for efficient thermal transfer
  • 650 °F maximum temperature suits high-heat process applications
  • Terminal box with 36 in lead wire and 34 in galvanized armor cable simplifies safe installation
  • Aluminium extrusion construction provides durable heat distribution across 4 in inside diameter

Specifications

BrandTEMPCO

Questions about this item

How hot does the 277V 750W band heater get during continuous operation?

The heater reaches a maximum operating temperature of 650 degrees Fahrenheit with a watt density of 35 watts per square inch.

What electrical supply and connection does the MXH01930 require to operate?

It needs a 277VAC supply drawing 3.13 amps and terminates with a 36 inch lead wire inside 34 inch galvanized armor cable.

Will the 4 inch inside diameter band heater fit the existing cylinder on my older machine?

The heater is built for a 4 inch inside diameter with a 1 1/2 inch width and a tolerance of plus or minus 3/32 inch.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.