Tempco
Tempco CSH00176 Strip Heater 240V 14 in 1200 °F
240 V surface-mount strip heater, 14 in long with 13 in mounting centres, 500 W output and 1200 °F max sheath temperature in 304 stainless steel
- Delivers 500 W at 240 V for reliable industrial heating
- Withstands up to 1,200 °F sheath temperature for demanding applications
- 304 stainless-steel sheath resists corrosion and extends service life
- CSA and cURus certified to UL 499 and C22.2 No. 72 standards
- Surface-mount design with 13 in mounting centres simplifies installation
Industrial Strip Heater
The Tempco CSH00176 is a surface-mount strip heater designed for industrial process heating. It operates on a 240V single-phase supply and delivers 500 W of power. The unit reaches a maximum sheath temperature of 1200 °F for demanding thermal applications.
304 Stainless Construction
The sheath uses seamless 304 stainless steel for corrosion resistance and durability. Mounting tabs with slotted holes measuring 1/2 in by 5/16 in allow secure surface installation on a 13 in mounting dimension. Parallel 10-32 screw terminals simplify wiring connections in the field.
Certified Thermal Performance
The heater carries CSA, cURus and NRTL certifications under UL 499 and Canadian Standard C22.2 No 72. Watt density is rated at 14 W/sq in for consistent heat transfer. The design suits equipment requiring reliable high-temperature operation within the specified limits.
Highlights
- Delivers 500 W at 240 V for reliable industrial heating
- Withstands up to 1,200 °F sheath temperature for demanding applications
- 304 stainless-steel sheath resists corrosion and extends service life
- CSA and cURus certified to UL 499 and C22.2 No. 72 standards
- Surface-mount design with 13 in mounting centres simplifies installation
Specifications
| Brand | TEMPCO |
|---|
Questions about this item
What voltage and wattage does the CSH00176 strip heater operate at, and what does that limit in practice?
It runs on 240 V single-phase power and draws 500 W, so the heater is capped at that output and cannot be used on 120 V or three-phase supplies.
What are the overall length and mounting-hole centres for the CSH00176 strip heater?
The heater is 14 in long overall with mounting tabs spaced 13 in apart, and each tab has a 1/2 in by 5/16 in slotted hole for a 10-32 screw.
How is the CSH00176 strip heater installed, and which step is often missed?
Surface-mount the unit using the integral tabs and 10-32 screws through the slotted holes, then connect the parallel terminals; the step often missed is tightening the terminal screws to the specified torque so the connection stays secure at 1,200 °F.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
