Telemecanique Sensors
Telemecanique Sensors ZCKE08 Limit Switch Head Wobble Stick 5.06 in
A wobble-stick limit-switch head with 5.06 in actuator, 90° omnidirectional travel and NEMA 1, 2, 3, 4, 12 ratings for XCKJ bodies
- Omnidirectional 90° travel covers wide detection zones
- Wobble stick actuator extends 5.06 in for flexible positioning
- Operates reliably from -25 °F to 70 °F
- Low 1.44 in-oz operating force suits sensitive mechanisms
- NEMA 1, 2, 3, 4, 12 ratings suit harsh environments
Product Identity
The Telemecanique Sensors ZCKE08 is a limit switch head with a wobble stick actuator mounted on top. It suits machine shops needing omnidirectional presence detection on conveyors or guards. The 5.06 in actuator length provides reach for misaligned targets. Standards include CCC, CE, CSA and UL.
Compatibility Check
Verify the existing limit switch body matches manufacturer number XCKJ for proper fit. Confirm the control circuit operates within 3A or 0.27A ratings depending on voltage. Ensure the mounting location meets NEMA 1, 2, 3, 4 or 12 enclosure requirements. The 90 degree travel angle must suit the mechanism.
Thermals and Power
Operating temperature spans -25 to 70 degrees F for reliable switching in cold or warm shops. The low 1.44 in-oz operating force reduces mechanical wear on the actuator. No internal heat source means the head adds negligible thermal load to the enclosure. Power draw stays within the stated contact ratings during normal operation.
Highlights
- Omnidirectional 90° travel covers wide detection zones
- Wobble stick actuator extends 5.06 in for flexible positioning
- Operates reliably from -25 °F to 70 °F
- Low 1.44 in-oz operating force suits sensitive mechanisms
- NEMA 1, 2, 3, 4, 12 ratings suit harsh environments
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
Does the ZCKE08 head include the switch body or must I buy an XCKJ base separately?
The ZCKE08 is the head only; you must purchase a compatible XCKJ switch body separately to complete the assembly.
Which mounting orientation suits a 5.06 in wobble stick with 90 degree omnidirectional travel?
The actuator is top-mounted, so the head installs upright and the 5.06 in stick swings freely through 90 degrees in any direction.
What does the 1.44 in-oz operating force mean when the head is fitted to an XCKJ body?
Only 1.44 in-oz of torque is needed to deflect the stick and actuate the contacts, giving very light touch detection in the machine.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
