Telemecanique Sensors
Telemecanique Sensors ZCKD16 Limit Switch Head Roller Lever Plunger
Roller lever plunger head provides side-actuated limit switching with 70-degree travel and 1.77 in-lb operating force
- Roller lever plunger actuates from the side for flexible mounting
- 70-degree travel with left and right movement covers wide detection range
- NEMA 1, 2, 3, 4 and 12 ratings suit varied indoor environments
- 77 in-lb operating force gives precise mechanical switching
- Compatible with XCKL and XCKM bodies for easy integration
Product Identity
The Telemecanique Sensors ZCKD16 is a limit switch head with a roller lever plunger actuator. It is designed for machine builders and maintenance technicians who need reliable position sensing on automated equipment.
Thermals, Noise and Power
The head operates mechanically without a motor, so it produces no audible noise and generates no measurable heat during normal cycling. Electrical ratings of 3A and 0.27A at the stated voltages keep power draw negligible in control circuits.
Bundled Impact
The unit is sold as a head only and includes no wiring, mounting hardware or configuration software. Buyers who need a complete switch assembly must source the compatible XCKL or XCKM body separately.
Highlights
- Roller lever plunger actuates from the side for flexible mounting
- 70-degree travel with left and right movement covers wide detection range
- NEMA 1, 2, 3, 4 and 12 ratings suit varied indoor environments
- 77 in-lb operating force gives precise mechanical switching
- Compatible with XCKL and XCKM bodies for easy integration
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
How do I mount the ZCKD16 head onto an XCKL or XCKM body and which orientation step is often missed?
The head fits XCKL and XCKM bodies; align the side actuator so its 1.36 in lever moves left and right through the full 70 degree travel and torque the mounting screws to the body spec.
What maintenance does the roller lever plunger need over time?
Inspect the roller for wear and verify the 1.77 in-lb operating force remains consistent; replace the head if the lever travel exceeds 70 degrees or the roller shows flat spots.
At what temperature limit does the switch head stop operating reliably?
The operating range ends at 70 degrees F; sustained use above this temperature can cause the actuator to miss its 70 degree travel or alter the 1.77 in-lb operating force.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
