Telemecanique Sensors
Telemecanique Sensors ZCE01 Limit Switch Head Rotary Lever Side Momentary
Limit switch head with a side-mounted rotary lever for momentary, omnidirectional actuation
- Rotary lever actuates from the side for flexible mounting
- Momentary action resets automatically after each operation
- Operates reliably from -25 °F to 70 °F
- Travel of .31 in with .89 in-lb operating force
- Certified to CCC, CSA, IEC and UL standards
What this limit switch head does
The Telemecanique Sensors ZCE01 is a rotary-lever limit switch head designed for side actuation in industrial control circuits. It provides momentary contact operation for machinery position sensing and safety interlock applications.
Mounting and common issues
The head mounts directly onto compatible Telemecanique Sensors bodies including XCKD, XCKP, XCKT and XCMD series. Installation requires correct alignment of the rotary lever travel of 0.31 in and operating force of 0.89 in-lb to avoid premature wear or missed actuation.
Check your existing setup first
Verify that your limit switch body matches one of the listed manufacturer numbers and that the operating temperature range of -25 to 70 degrees F suits the installation environment. The head carries CCC, CSA, IEC and UL listings but has no IP rating, so consider enclosure protection if exposed to dust or moisture. Buyers needing a maintained-contact head or a different actuator style should look elsewhere.
Highlights
- Rotary lever actuates from the side for flexible mounting
- Momentary action resets automatically after each operation
- Operates reliably from -25 °F to 70 °F
- Travel of .31 in with .89 in-lb operating force
- Certified to CCC, CSA, IEC and UL standards
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
How do I verify the ZCE01 head is operating correctly after installation?
Confirm the rotary lever moves omnidirectionally through the full 0.31 in travel and actuates the contact block with approximately 0.89 in-lb operating force.
What comes in the box with the ZCE01 and what must I purchase separately?
The ZCE01 limit switch head is supplied alone; a compatible contact block body such as XCKD, XCKP, XCKT or XCMD must be bought separately.
Which version of the ZCE01 should I choose for my application?
The ZCE01 is a single model — rotary lever, side-mounted, momentary action — rated for -25 to 70 Degrees F and CCC, CSA, IEC, UL Listed standards.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
