Telemecanique Sensors
Telemecanique Sensors XZCPV1241L5 M12 4-pin right-angle cordset 16.4 ft gray 250VAC/300VDC 3A 18AWG IP65 IP67
Right-angle M12 4-pin cordset with 16.4 ft PVC cable, 3 A rating, IP65/IP67 sealing and CSA/IEC/UL listings
- Right-angle M12 connector simplifies routing in tight spaces
- 4 ft gray PVC cable reaches distant sensors and actuators
- 3 A at 250 VAC or 300 VDC powers typical control circuits
- IP65 and IP67 ratings protect against dust and water ingress
- CSA certified and UL listed for code-compliant installations
M12 4-pin right-angle cordset
This Telemecanique Sensors cordset provides a female M12 right-angle connector on one end and bare wires on the other. It is built for machinery and machine-shop installations where a compact angled connection is required. The 16.4 ft gray PVC jacketed cable carries 18 AWG conductors rated for 3 A at 250 VAC or 300 VDC.
IP65 IP67 environmental sealing
The assembly meets IP65 and IP67 ratings, so it resists dust ingress and temporary water immersion. Operating temperature spans -13 °F to 176 °F, allowing use in cold and hot industrial environments. The PVC jacket adds chemical and abrasion resistance for routing near oils or coolants.
3 A capacity with 18 AWG conductors
At 3 A the cordset comfortably powers sensors, actuators and small contactors on 250 VAC or 300 VDC circuits. The 18 AWG wires limit current to this level, so loads exceeding 3 A will require a larger conductor size. The 16.4 ft length suits typical panel-to-device runs without excessive voltage drop.
Highlights
- Right-angle M12 connector simplifies routing in tight spaces
- 4 ft gray PVC cable reaches distant sensors and actuators
- 3 A at 250 VAC or 300 VDC powers typical control circuits
- IP65 and IP67 ratings protect against dust and water ingress
- CSA certified and UL listed for code-compliant installations
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
Should I choose a different length or pin count for this M12 cordset?
This model is a 4-pin, 16.4 ft right-angle cordset; other lengths or pin counts would be separate part numbers.
What does the 3 A rating mean when the cordset is installed?
The 3 A rating is the maximum continuous current each 18 AWG conductor can carry at up to 176 °F ambient.
How does the M12 interface limit voltage in practice?
The M12 connection is rated for 250 VAC or 300 VDC, so the cordset must not exceed those voltages.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
