Telemecanique Sensors
Telemecanique Sensors XZCPV1141L2 Cordset 2 m Gray 250VAC/300VDC
A 2 m PVC-jacketed M12 cordset with a straight 4-pin female connector and bare-wire tail, rated 3 A at 250 VAC or 300 VDC and sealed to IP65 and IP67
- 4-pin M12 female straight connector for secure sensor wiring
- 2 m grey PVC cable rated 250 VAC / 300 VDC for flexible routing
- IP65 and IP67 sealing protects against dust and water ingress
- 18 AWG conductors carry up to 3 A across -13 °F to 176 °F
- CSA, IEC and UL listed for compliant industrial installations
Industrial M12 cordset for sensor wiring
The Telemecanique Sensors XZCPV1141L2 is a 2 m cordset designed to connect M12 sensor or actuator ports to bare-wire terminations. It suits automation engineers and maintenance technicians who need a reliable link between field devices and control cabinets.
Rated 3 A at 250 VAC or 300 VDC with 18 AWG
The PVC-jacketed cable carries a maximum of 3 A within a temperature window of -13 °F to 176 °F. Its 4-pin straight M12 female connector meets IP65 and IP67 ingress protection, but the bare-wire end offers no connector-side sealing.
CSA, IEC and UL listed with gray PVC jacket
The gray PVC sheath resists oils and abrasion typical of machine-shop environments. The straight M12 mounting orientation keeps the cable exit inline, easing routing in tight cable trays, while the bare-wire finish requires installer-supplied termination.
Highlights
- 4-pin M12 female straight connector for secure sensor wiring
- 2 m grey PVC cable rated 250 VAC / 300 VDC for flexible routing
- IP65 and IP67 sealing protects against dust and water ingress
- 18 AWG conductors carry up to 3 A across -13 °F to 176 °F
- CSA, IEC and UL listed for compliant industrial installations
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
Which cordset length should I choose for my installation?
This cordset is supplied at 2 m (6.56 ft). Select it when that exact reach matches the distance between your M12 sensor and the controller.
What does the 3 A rating mean when the cordset is wired into a machine?
The 18 AWG conductors are rated for a continuous 3 A at up to 250 VAC or 300 VDC, so the circuit must not exceed that current.
How do the IP65 and IP67 ratings limit where I can mount the M12 connector?
Both ratings apply to the M12 end, meaning it withstands water jets and temporary immersion when the connector is properly tightened.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
