Telemecanique Sensors
Telemecanique Sensors XZCP1141L2 cordset 6.56 ft 4-pin M12 250VAC/300VDC
A 6.56 ft PUR-jacketed cordset with a straight 4-pin M12 female connector and bare-wire termination, rated 250VAC/300VDC at 3 A, 18 AWG, IP65/IP67, CSA/IEC/UL certified
- 4-pin M12 female connector for secure sensor hookup
- 56 ft PUR-jacketed cable resists oil and abrasion
- 250 VAC / 300 VDC rating suits industrial power circuits
- IP65 and IP67 sealing protects against dust and water ingress
- CSA, IEC and UL listed for compliant installations
4-Pin M12 Cordset for Sensor Wiring
This Telemecanique Sensors cordset provides a 4-pin M12 female connector on one end and bare wires on the other for direct termination. The 6.56 ft PUR jacketed cable carries up to 3 A at 250 VAC or 300 VDC. It is suited for connecting sensors, actuators or I/O modules in industrial control panels and machinery.
Straight M12 Connector with IP65 and IP67 Rating
The straight M12 female end locks securely onto mating sensors or distribution boxes. A black PUR jacket resists oil, abrasion and chemicals while staying flexible from -13 °F to 176 °F. Dual IP65 and IP67 ratings mean the connection survives wash-down jets and temporary immersion in wet or dusty environments.
Replaces Damaged or Short Factory Leads
Use this cordset to replace a severed cable, extend a short pigtail or re-terminate a connector that has lost its seal. The bare-wire end lets you cut to exact length and crimp ferrules or screw terminals without soldering. CSA, IEC and UL listings confirm compliance for North American and international panels. Buyers needing a male M12 plug or a different pin count will need a separate part.
Highlights
- 4-pin M12 female connector for secure sensor hookup
- 56 ft PUR-jacketed cable resists oil and abrasion
- 250 VAC / 300 VDC rating suits industrial power circuits
- IP65 and IP67 sealing protects against dust and water ingress
- CSA, IEC and UL listed for compliant installations
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
What voltage does the 4-pin M12 interface support?
The 4-pin M12 connector is rated for 250 VAC and 300 VDC, with a current limit of 3 A.
What are the cable dimensions and jacket material for mounting?
The cordset uses an 18 AWG PUR jacketed cable, 2 m long, with an IP65 and IP67 rating.
How is the M12 end wired, and what mistake should be avoided?
End 1 is a straight female M12; End 2 is bare wire. Do not assume End 2 has a connector — strip and terminate it correctly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
