Telemecanique Sensors
Telemecanique Sensors XZCP0941L5 M8 4-pin female to bare wire cordset 16.4 ft black PUR
A 4-pin M8 female to bare-wire cordset with 16.4 ft of black PUR cable, rated IP65 and IP67 for industrial use
- M8 4-pin female connector mates directly with sensors
- 4 ft PUR cable reaches distant devices without splices
- 3 A 18 AWG conductors carry sensor signals reliably
- IP65 IP67 rating seals out dust and water jets
- CSA IEC UL listed for compliant panel builds
Industrial M8 4-pin cordset
The Telemecanique Sensors XZCP0941L5 is a straight M8 4-pin female to bare wire cordset designed for sensor and actuator connections in industrial machinery. Its 16.4 ft PUR jacket resists oil and abrasion while meeting IP65 and IP67 ingress protection for wet or dusty environments. CSA certified, IEC compliant and UL listed, it suits control panels and field wiring where reliable signal transmission is required. Buyers needing a pre-assembled plug with a different pin count or a moulded connector on both ends should look elsewhere.
Wiring integration and cable management
The female M8 end threads directly onto compatible sensors or I/O blocks, while the bare-wire end terminates in screw terminals, spring clamps or terminal blocks inside the cabinet. Four conductors at 18 AWG carry up to 3 A each at 250 VAC or 300 VDC, eliminating the need for field crimping on the device side. The 5 m length provides routing slack across cable trays or through conduit without excessive coils that consume panel space. Installations requiring shielded cable or a right-angle M8 orientation are not addressed by this cordset.
Temperature resilience and power handling
The PUR jacket remains flexible from -13 °F to 176 °F, maintaining seal integrity through thermal cycling in unheated plants or outdoor equipment. At the rated 3 A per conductor the voltage drop stays low over the full 16.4 ft run, so contactors and proximity switches receive full control voltage. The black jacket absorbs minimal radiant heat, keeping conductor temperatures within the certified limits during continuous duty. Applications exceeding 3 A or operating outside the stated temperature range are not supported.
Highlights
- M8 4-pin female connector mates directly with sensors
- 4 ft PUR cable reaches distant devices without splices
- 3 A 18 AWG conductors carry sensor signals reliably
- IP65 IP67 rating seals out dust and water jets
- CSA IEC UL listed for compliant panel builds
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
How much current can the 18 AWG conductors carry continuously?
The cordset is rated for a maximum of 3 A through its 18 AWG wires.
Will the PUR jacket and IP65/IP67 seals handle all-day exposure to oil and water spray?
Yes, the PUR jacket resists oils and the IP65/IP67 ratings confirm protection against water jets and temporary immersion during continuous operation.
What voltage rating must the mating M8 male connector and the control circuit support?
The assembly is rated 250 V AC / 300 V DC, so the male connector and circuit must be rated for at least those voltages.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
