Telemecanique Sensors
Telemecanique Sensors XUFN05321 Fiber Optic Cable Diffuse 2 m 70 mm
A diffuse fiber-optic cable with a 2 m length and 70 mm maximum sensing distance for use with XUYA photoelectric amplifiers
- Diffuse sensing detects objects up to 70 mm
- 2 m cable length allows flexible routing
- Threaded tip secures mounting in place
- Polyethylene sheath protects fibers from damage
- Operates from -13 °F to 140 °F
Fiber Optic Cable for XUYA Amplifier
The Telemecanique Sensors XUFN05321 is a diffuse fiber optic cable designed for use with XUYA photoelectric amplifiers. It provides a sensing solution for industrial automation where a separate amplifier unit is preferred. The threaded tip allows secure mounting in machine frames or sensor brackets. This cable suits engineers integrating presence detection into existing XUYA amplifier setups.
Sensing Limits and Environmental Range
Diffuse sensing reaches a maximum distance of 70 mm and detects objects down to 1.000 mm in diameter. The beam diameter at the tip is 1.0 mm. A polyethylene sheath protects the plastic core fiber across an operating range of -13 to 140 degrees Fahrenheit. Cable length is fixed at 2 m with a 2 mm outer diameter, so routing must accommodate this reach without extension.
Replaces Damaged or Short Cables in XUYA Systems
This cable replaces a worn, cracked or too-short fiber run on an existing XUYA amplifier installation. The upgrade is worth it when the current cable cannot reach the sensing point or when the sheath has degraded in the -13 to 140 degree F range. It is not for applications needing through-beam sensing, longer range than 70 mm, or amplifiers other than the XUYA series.
Highlights
- Diffuse sensing detects objects up to 70 mm
- 2 m cable length allows flexible routing
- Threaded tip secures mounting in place
- Polyethylene sheath protects fibers from damage
- Operates from -13 °F to 140 °F
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
Should I choose the 2 m cable length or a different length for my XUFN05321 setup?
The XUFN05321 is supplied with a fixed 2 m cable length. Select this version when the 2 m reach matches your mounting distance to the XUYA photoelectric amplifier.
What does the 70 mm maximum sensing distance mean when the sensor is installed?
In a real machine the diffuse sensor will reliably detect objects up to 70 mm away. The 1.0 mm beam diameter and 1.000 mm minimum object size define the smallest target it can resolve at that range.
Which IEC standard applies and what does it cap in practice?
The cable is built to IEC standards, which cap the operating temperature range at -13 °F to 140 °F and govern the polyethylene sheath and plastic core fibre performance in industrial environments.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
