Telemecanique Sensors
Telemecanique Sensors XSDA400519H7 inductive proximity sensor
Inductive rectangular proximity sensor detecting metal up to 40 mm with 24 to 240 V AC supply, 2-wire NO/NC output, IP67 rating and -13 to 158 °F operating range
- Wide 24-240V AC supply range suits many panels
- 40 mm unshielded sensing distance detects targets reliably
- IP67 plastic housing resists dust and water ingress
- 2-wire NO/NC output simplifies wiring to 500 mA loads
- Operates from -13 to 158 °F at 10 Hz switching
Application fit
The Telemecanique Sensors XSDA400519H7 is an unshielded inductive rectangular proximity sensor designed for industrial automation tasks. It suits engineers who need non-contact metal detection at a 40 mm range on conveyors, packaging lines or machine guards. Buyers who require shielded mounting flush with metal surfaces or detection distances beyond 40 mm cannot use this model.
Sustained operation
Rated for 10 Hz switching frequency, the sensor maintains reliable output during continuous cycling on high-speed production equipment. The 2-wire AC circuit handles 24 to 240 V supply without a separate DC converter, and the 500 mA maximum load supports direct control of contactors or PLC inputs. Operating temperature spans -13 to 158 degrees F, so performance stays stable through cold starts and hot ambient conditions.
Build and connections
The plastic housing carries an IP67 rating, resisting water jets and temporary immersion common in wash-down environments. Screw clamp terminals accept solid or stranded wire without special tools, simplifying panel wiring and future maintenance. At 100 mm length the rectangular body fits standard mounting brackets, while the NO/NC selectable output lets installers choose fail-safe logic per zone. CCC and RoHS markings confirm compliance for regulated markets.
Highlights
- Wide 24-240V AC supply range suits many panels
- 40 mm unshielded sensing distance detects targets reliably
- IP67 plastic housing resists dust and water ingress
- 2-wire NO/NC output simplifies wiring to 500 mA loads
- Operates from -13 to 158 °F at 10 Hz switching
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
How much heat does the XSDA400519H7 generate when it runs continuously at 240V AC?
The sensor operates between -13 and 158 degrees F and draws a maximum of 500mA; continuous operation at 240V AC stays within this temperature envelope without additional cooling.
What supply voltage must my control panel provide for the XSDA400519H7 to operate?
The unit requires 24 to 240V AC; ensure your panel delivers within this range and connect via the screw clamp terminals for reliable power.
Will the XSDA400519H7 detect metal targets at the same 40 mm range when mounted beside older unshielded sensors?
Yes, the 40 mm sensing distance is maintained at 10 Hz switching frequency; keep adequate spacing to prevent mutual interference with adjacent unshielded devices.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
