Telemecanique Sensors
Telemecanique Sensors XSAV11801 Inductive Proximity Sensor 30 mm
An inductive proximity sensor with a 30 mm diameter, 81 mm sensing range and IP67 nickel-plated brass housing for 24–240 V AC or 24–210 V DC supplies
- Detects metal up to 81 mm away
- Operates on 24–240 V AC or 24–210 V DC
- Withstands –13 °F to 158 °F environments
- IP67 nickel-plated brass housing resists dust and water
- 2-wire NC output simplifies wiring installation
Inductive Proximity Sensor 30 mm
This cylindrical inductive proximity sensor from Telemecanique Sensors detects metal objects without contact. It suits automation tasks such as position monitoring, counting and safety interlocks on conveyors and machine tools.
2-wire AC/DC interface 24 to 240 V AC 24 to 210 V DC
The sensor operates on a two-wire circuit across a wide supply range of 24 to 240 V AC or 24 to 210 V DC. Switching frequency is limited to 100 Hz and the maximum load current is 1.5 mA, so it fits low-speed control loops but not high-speed counting.
Unshielded 81 mm sensing distance IP67
An unshielded design gives a maximum detecting distance of 81 mm, providing generous headroom for misaligned targets. The nickel-plated brass housing rated IP67 withstands water jets and dust, while the operating range of -13 to 158 degrees F covers most industrial environments.
Highlights
- Detects metal up to 81 mm away
- Operates on 24–240 V AC or 24–210 V DC
- Withstands –13 °F to 158 °F environments
- IP67 nickel-plated brass housing resists dust and water
- 2-wire NC output simplifies wiring installation
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
Should I pick the 30 mm model or a different size for my application?
This sensor has a 30 mm cylindrical body and an 81 mm max detecting distance; choose it when you need that specific reach and form factor.
What does the 81 mm detecting distance mean once the sensor is mounted in a machine?
It will trigger on a standard metal target up to 81 mm away, though actual range varies with target size, material and mounting flush or non-flush.
How does the 2-wire AC/DC interface limit the sensor in practice?
The 2-wire output works on 24 to 240 V AC or 24 to 210 V DC and caps load current at 1.5 mA, so it suits simple on/off control but not high-current loads.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Goldendisk
Goldendisk IR Break Beam Sensor 5mm LED Counting Module Split Through-Beam Photoelectric Switch
$23.99
0.00028567BTC
In stock