Telemecanique Sensors
Telemecanique Sensors XS8C4A1MPN12 Inductive Proximity Sensor 20 mm 24-240V AC/DC 2 Wire IP65 IP67 IP69K
Inductive rectangular proximity sensor detects metal at 20 mm, operates on 24-240 V AC/DC with a two-wire NO/NC output, and withstands harsh environments with IP65, IP67 and IP69K ratings
- Detects metal at 20 mm distance
- Wide 24-240 V AC/DC supply range
- Simple two-wire installation saves wiring time
- Withstands washdown with IP65 IP67 IP69K ratings
- Operates from -13 °F to 158 °F
Rectangular Inductive Sensor
The Telemecanique Sensors XS8C4A1MPN12 is a rectangular inductive proximity sensor designed for industrial automation. It operates on a wide 24 to 240V AC/DC supply with a simple two-wire connection. The sensor provides a maximum detecting distance of 20 mm and features a shielded construction for reliable mounting. Its plastic housing achieves IP65, IP67 and IP69K protection ratings.
Suited For Rugged Machine Monitoring
This sensor suits machine builders who need non-contact metal detection in wet or high-pressure washdown environments. The broad voltage range simplifies integration into existing AC or DC control circuits without extra power supplies. Buyers who require analogue output, longer sensing ranges or flush mounting in metal enclosures should look at alternative sensor types.
20 mm Range With 300 Hz Switching
The 20 mm sensing distance handles standard presence detection on conveyors, guards and tooling. A 300 Hz operating frequency supports fast cycling applications while the 200 to 300 mA load capacity drives most PLC inputs and small relays directly. The screw clamp terminals accept solid or stranded wire for secure installation. Operating temperature spans -13 to 158 degrees F for use in harsh ambient conditions.
Highlights
- Detects metal at 20 mm distance
- Wide 24-240 V AC/DC supply range
- Simple two-wire installation saves wiring time
- Withstands washdown with IP65 IP67 IP69K ratings
- Operates from -13 °F to 158 °F
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
Does my control panel need a 24-240V AC/DC supply to run this 2-wire inductive sensor?
Yes, the sensor operates on any supply between 24 and 240V AC/DC and connects directly with its two-wire screw-clamp terminals.
Can the 20 mm sensing range still trigger reliably when mounted behind a 12 mm non-metallic cover?
The 20 mm maximum detecting distance is specified for standard target material; a 12 mm non-metallic cover will reduce the effective range, so verify the actual gap in your fixture.
After wiring, how do I confirm the NO/NC output is switching at the rated 300 Hz?
Place a metal target within 20 mm and watch the load toggle; a clean on-off cycle at line frequency indicates the 300 Hz switching is functioning.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
